Enphase Energy
Enphase Energy, Inc. (Form: 10-K, Received: 03/16/2017 13:10:51)
Table of Contents

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
 
 
Form 10-K
 
 
 
(Mark One)
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2016
 
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from              to             
Commission File Number: 001-35480
 
 
 
 
Enphase Energy, Inc.
(Exact name of registrant as specified in its charter)
 
 
 
Delaware
20-4645388
(State or other jurisdiction of
incorporation or organization)
(I.R.S. Employer
Identification No.)
1420 N. McDowell Blvd
Petaluma, CA 94954
(Address of principal executive offices) (Zip Code)
(707) 774-7000
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of each class:
Name of each exchange on which registered
Common Stock, par value $0.00001 per share
The NASDAQ Stock Market LLC
Securities registered pursuant to Section 12(g) of the Act: None
 
 
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes  ¨ No x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes  ¨ No  x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes  x No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes  x No  ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer
¨
Accelerated filer
x
Non-accelerated filer
¨  (Do not check if a smaller reporting company)
Smaller reporting company
¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes ¨ No x
The aggregate market value of the voting stock held by non-affiliates of the registrant on June 30, 2016 , based upon the closing price of $1.99 of the registrant’s common stock as reported on the NASDAQ Global Market, was approximately $56.1 million . Excludes approximately 18.6 million shares of the registrant’s common stock held by current executive officers, directors, and holders of five percent or more of the outstanding common stock in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.
As of March 6, 2017 , there were 82,525,301 shares of the registrant’s common stock outstanding.
 
 
 
 

DOCUMENTS INCORPORATED BY REFERENCE
 
Certain information called for by Part III of this Form 10-K is incorporated by reference to the Proxy Statement for the registrant’s 2017 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission not later than 120 days after December 31, 2016 .
 


Table of Contents

ENPHASE ENERGY, INC.
TABLE OF CONTENTS
 
 
Page
 
 
Item 1.
Item 1A.
Item 1B.
Item 2.
Item 3.
Item 4.
 
 
Item 5.
Item 6.
Item 7.
Item 7A.
Item 8.
 
 
 
 
 
 
 
 
Item 9.
Item 9A.
Item 9B.
 
 
Item 10.
Item 11.
Item 12.
Item 13.
Item 14.
 
 
Item 15.
Item 16.
 
 
 

1

Table of Contents

PART I
This Annual Report on Form 10-K contains “forward-looking statements” as defined under securities laws. Forward-looking statements include statements that are not historical facts and can be identified by terms such as “anticipates,” “believes,” “could,” “seeks,” “estimates,” “expects,” “intends,” “may,” “plans,” “potential,” “predicts, “projects,” “should,” “will,” “would” or similar expressions and the negatives of those terms. These forward-looking statements are contained principally in Item 1, Business; Item 1A, Risk Factors; Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations; and other sections of this Annual Report on Form 10-K. Our actual results or experience could differ significantly from the forward-looking statements. Factors that could cause or contribute to these differences include those discussed in Item 1A, Risk Factors, as well as those discussed elsewhere in this Annual Report on Form 10-K.
 
Forward-looking statements are inherently uncertain and you should not place undue reliance on these statements, which speak only as of the date that they were made. These cautionary statements should be considered in connection with any written or oral forward-looking statements that we may issue in the future. We do not undertake any obligation to release publicly any revisions to these forward-looking statements after completion of the filing of this Annual Report on Form 10-K to reflect later events or circumstances or to reflect the occurrence of unanticipated events.
 
In this report, unless otherwise indicated or the context otherwise requires, “Enphase Energy,” “Enphase,” “the Company,” “we,” “us,” and “our” refer to Enphase Energy, Inc., a Delaware corporation, and its subsidiaries.
Item 1. Business
Our Company
We deliver simple, innovative and reliable energy management solutions that advance the worldwide potential of renewable energy. Our semiconductor-based microinverter system converts direct current (DC) electricity to alternating current (AC) electricity at the individual solar module level, and brings a system-based, high technology approach to solar energy generation leveraging our design expertise across power electronics, semiconductors, networking, and cloud-based software technologies. Our technology was designed to increase energy production, simplify design and installation, improve system uptime and reliability, reduce fire risk, and provide a platform for intelligent energy management. Since inception, we have shipped more than 13 million microinverters, representing over 3 gigawatts of solar photovoltaic (PV) generating capacity, and more than 580,000 Enphase residential and commercial systems have been deployed in over 100 countries.
We were incorporated as PVI Solutions, Inc. in March 2006 in the State of Delaware and changed our name to Enphase Energy, Inc. in July 2007.
Industry Background
Historically, traditional central inverters were the only inverter technology used for solar photovoltaic, or PV installations. In an installation consisting of a traditional central inverter, the solar PV modules are connected in series strings. In a large installation, there are multiple series strings connected in parallel. The aggregated voltage from each of these strings is then fed into a large central inverter. As compared to microinverter systems, we believe that traditional central inverters have a number of design and performance challenges limiting innovation and their ability to reduce the cost of solar systems, including the following:
Productivity limits . If solar modules are wired using a traditional central inverter—group or “string” of modules are wired in series—an entire string’s output is limited by the output of the lowest-performing module. Because of its string design, there is a single point of failure risk with the traditional central inverter approach.
Reliability issues . Traditional central inverters are the single most common component of solar installations to fail, resulting in system downtime and adversely impacting total energy output. As a result, central inverters typically carry warranties of only 5 to 10 years.
Complex design and installation requirements . The central inverter-based solar PV installation requires greater effort on the part of the installer, both in terms of design and on-site labor. Central inverter installations require string design and calculations for safe and reliable operation, as well as

2

Table of Contents

specialized equipment such as DC combiners, conduits and disconnects. In addition, the use of high-voltage DC requires specialized knowledge and training and safety precautions to install central inverter technology.
Lack of monitoring . The majority of solar installations with central inverter technology offer limited monitoring capabilities. A failure of the central inverter will often go unnoticed for days or even weeks. If a module fails or is not performing to specification, the resulting loss of energy can go unnoticed for an extended period of time.
Safety issues . Central inverter solar PV installations have a wide distribution of high-voltage (600 volts to 1,000 volts) DC wiring. If damaged, DC wires can generate sustained electrical arcs, reaching temperatures of more than 5,000 °F. This creates the risk of fire for solar PV installation owners and injury for installers and maintenance personnel.
These challenges of traditional central inverters have a direct impact on the cost and expected return on investment of solar installations to both installers and system owners:
Installer . Solar PV installers aim for simple installation design, fast installation times and maximum system performance and predictability. The installation of high-voltage DC central inverter technology, however, requires significant preparation, precautionary safety measures, time-consuming string calculations, extensive design expertise and specialized installation equipment, training and knowledge. Together, these factors significantly increase complexity and cost of installation and limit overall productivity for the installer.
System owner . Solar system owners aim for high energy production, low cost, high reliability, and low maintenance requirements, as well as reduced fire risks. With traditional central inverters, owners often are unable to optimize the size or shape of their solar PV installations due to string design limitations. As such, they experience performance loss from shading and other obstructions, can face frequent system failures and lack the ability to effectively monitor the performance of their solar PV installation. In addition, central inverter installations operate at high-voltage DC which bears significant fire risks. Further, due to their large size, central inverter installations can affect architectural aesthetics of the house or commercial building.
Our Products
We design, develop, manufacture and sell home energy solutions that connect solar generation, energy storage and management on one intelligent platform. We have revolutionized the solar industry by bringing a systems approach to solar technology and by pioneering a semiconductor-based microinverter that converts energy at the individual solar module level and, combined with our proprietary networking and software technologies, provides advanced energy monitoring and control. This is vastly different than the central inverter approach that only converts energy of the entire array of solar modules from a single high voltage electrical unit, and lacks intelligence about the energy producing capacity of the solar array. In 2016 we expanded our product offerings by launching the Enphase AC Battery, a home-based energy storage system that homeowners can add to new or existing solar PV systems.
With the introduction of the Enphase Home Energy Solution, we bring a high technology , networked approach to solar generation plus energy storage, by leveraging our design expertise across power electronics, semiconductors and cloud-based software technologies. Our integrated approach to energy solutions maximizes a home’s energy potential while providing advanced monitoring and remote maintenance capabilities. Unlike our core competitors, who utilize a single-point or traditional inverter , or offer separate components of solutions, we have built-in system redundancy in both PV generation and energy storage, eliminating the risk that comes with a single-point of failure. Further , the nature of our cloud-based, monitored system allows for remote firmware and software updates, enabling cost-effective remote maintenance and ongoing utility compliance.
The Enphase Home Energy Solution consists of four key components -- Enphase microinverters, the AC Battery, an Envoy gateway, and Enlighten cloud-based software:
Enphase microinverters provide highly reliable power conversion at the individual solar module level by introducing a digital architecture that incorporates custom application specific integrated circuits, or ASICs, specialized power electronics devices, and an embedded software subsystem that maximizes energy production from each module. The Enphase Home Energy Solution with IQ, to be introduced in 2017, provides a path to substantially lower unit cost, a simplified installation process, and higher

3

Table of Contents

performance and enhanced features. We have announced manufacturer partnerships that integrate our next generation IQ microinverter into a PV module to create an AC Module that will further simplify system design and installation.
The Enphase AC Battery, a key part of the Enphase Home Energy Solution, applies the modular architecture developed for our microinverter to energy storage. Our approach delivers low up-front costs resulting from the AC Battery’s system design and the ease and speed of installation. The AC battery balances safety and performance and is warranted for 10 years.
The Envoy bi-directional communications gateway is installed at the system location and serves as a hub providing three critical roles: collecting and sending data to Enlighten software, receiving and distributing microinverter firmware or software updates, and managing the use of energy within the system. Homeowners can maximize the value of their solar PV system, taking advantage of self-consumption and time-of-use tariff management opportunities with an expandable platform for evolving uses of energy storage , such as residential peak shaving and grid services. One Envoy is typically sold with each solar installation and can support up to 600 Enphase microinverters, making it compatible for both residential and commercial applications.
Our Enlighten cloud-based software provides the capabilities to remotely monitor , manage, and maintain an individual system or a fleet of systems. The software collects and analyzes system performance information to enable owners and operators to realize the highest performance of their solar PV system. Two versions of the monitoring software are available: MyEnlighten, designed for consumers , provides performance assurance and Enlighten Manager , available for the solar professional, provides detailed diagnostic capabilities, as well as fleet management tools.
 
Key benefits of our Home Energy Solution include:
 
Truly Integrated. The Enphase Home Energy Solution is a fully integrated solar generation plus storage offering from one provider. Designed and manufactured to work together, the Home Energy Solution is a truly integrated home energy solution.

Higher Performance. Our microinverter system delivers higher performance by maximizing the energy production of each module. A microinverter at each module overcomes issues such as module- mismatch and soiling or shading which can have a significant impact on string inverter systems. Enphase microinverters also provide greater system availability with no single-point of failure. An independent analysis from PV Evolution Labs has concluded an Enphase microinverter system yields higher performance over systems with string inverters or traditional inverters. We believe that our microinverter systems achieve higher energy production and can generate superior returns on investment relative to competitive solutions for system owners.     
 
Simplified Design and Installation. The all-AC infrastructure simplifies the design process and eliminates the typical costs of a complicated DC voltage system for PV or Storage . In addition, our microinverters are installed on the roof and hidden from view , with minimal impact to the aesthetics of a home or building. We also offer additional tools, such as the Enphase Installer Toolkit mobile app or the Enphase AC Combiner Box, to further improve installation time and reduce balance of system materials costs.     
 
Enhanced Safety . Microinverters and AC Batteries are safer because they process low voltage DC and are isolated to the module level, leading to an all-AC architecture. Our microinverter system does not contain any of the high voltages common to string inverter systems. High voltage arc faults associated with string or traditional inverters are the leading cause of fires of solar PV installations. Microinverter technology mitigates this safety risk.     

Reduced Operations and Maintenance Costs. Our microinverter system is highly reliable with one million power-on hours of testing incorporated into our microinverter design. This high reliability , plus a distributed architecture means ongoing operations and maintenance do not require emergency truck rolls, unlike string inverter or traditional inverters which have a 100% probability of failure leading to full replacement within 10 to 12 years. In addition, with module-level monitoring capabilities, remote maintenance can pinpoint issues, thus reducing any time on site. Finally , the networked-nature of our

4

Table of Contents

system enables us to remotely update the firmware and software of the microinverters, reducing ongoing utility compliance costs.     
 
Our Strategy
Our objective is to be the leading provider of energy management solutions for the solar industry worldwide. Key elements of our strategy include:
Grow market share in our core markets. We intend to capitalize on our market leadership in the microinverter category and our momentum with installers and owners to expand our market share position in our core markets.
Enter new geographic markets. We intend to further increase our market share in Europe, the Asia Pacific region and Latin America. In addition, we intend to expand into new markets with new and existing products and local go-to-market capabilities.
Expand our product offerings. We continue to make R&D investments to develop all components of our energy management solution and remain committed to providing our partners with best-in-class power electronics, storage solutions, communications, and load control all managed by a cloud-based energy management system.
Increase power and efficiency and reduce cost per Watt. Our engineering team is focused on continuing to increase average power conversion efficiency above 97% and AC output power beyond 280 watts. We intend to continue to leverage our semiconductor integration, power electronics expertise and manufacturing economies of scale to further reduce cost per watt.
Extend our technological innovation. We distinguish ourselves from other inverter companies with our systems-based and high technology approach, and the ability to leverage strong research and development capabilities.
Customers and Sales
We currently offer microinverter systems targeting the residential and commercial markets in the United States, Canada, Mexico and certain Central American markets, the United Kingdom, France, the Benelux region, certain other European markets, Australia, New Zealand and certain other Asian markets. We sell our microinverter systems primarily to solar distributors who resell to installers and integrators, who in turn integrate our products into complete solar PV installations for residential and commercial system owners. We work with many of the leading solar and electrical distributors. In addition to our distributors, we sell directly to large installers, OEMs and strategic partners. Our OEM customers include solar module manufacturers who bundle our products and solutions with their solar module products and resell to both distributors and installers. Strategic partners include a variety of companies including industrial equipment suppliers and providers of solar financing solutions. In 2016, CED Greentech accounted for approximately 18% of net revenues. Historically, revenues generated from the U.S. market have represented more than 80% of our total revenue.
Manufacturing, Quality Control and Key Suppliers
We outsource the manufacturing of our products to manufacturing partners. Flextronics International Ltd. assembles and tests our microinverter, AC Battery and Envoy products. Prices for such services are mutually agreed to by the parties on a quarterly basis, and we are obligated to purchase manufactured products and raw materials that cannot be resold upon the termination of the agreement. Flextronics also provides receiving, kitting, storage, transportation, inventory visibility and other value-added logistics services at locations managed by Flextronics. Phoenix Contact GmbH & Co. KG manufactures our custom AC cables. ELIIY Power Co., Ltd. provides the chemistry for our AC Battery storage solution. In addition, we rely on several unaffiliated companies to supply certain components used in the fabrication of our microinverter system.
Customer Service
We maintain high levels of customer engagement through our customer support group and the Enlighten cloud-based software portal, and have cultivated an organizational focus on customer satisfaction. Our dedicated customer support group focuses on responding to inbound inquiries regarding any of our products and services.
Research and Development
We devote substantial resources to research and development with the objective of developing new products and systems, adding new features to existing products and systems and reducing unit costs. Our development strategy is to identify features, products and systems for both software and hardware that reduce the

5

Table of Contents

cost and optimize the effectiveness of our energy management solutions for our customers. We measure the effectiveness of our research and development against metrics, including product unit cost, efficiency, reliability, power output and ease-of-use.
Our research and development expenses were $50.7 million , $50.8 million and $45.4 million for the years ended December 31, 2016 , 2015 and 2014 , respectively.
Intellectual Property
Our success depends, in part, on our ability to maintain and protect our proprietary technologies. We rely primarily on patent, trademark, copyright and trade secrets laws in the United States and similar laws in other countries, confidentiality agreements and procedures and other contractual arrangements to protect our technology. As of December 31, 2016, we had 92 issued U.S. patents, 57 issued foreign patents, 23 pending U.S. patent applications and 14 pending foreign counterpart patent applications. Our issued patents are scheduled to expire between years 2027 and 2033.
We license certain power line communications technology and software for integration into our ASICs pursuant to a fully-paid, royalty-free license, which includes the right for us to source directly from the licensor’s suppliers or manufacture certain ASIC hardware should the licensor fail, under certain conditions, to deliver such technology in the future. This license includes a limited exclusivity period during which the licensor has agreed not to license the licensed technology to any third party manufacturer of electronic components or systems for use in the solar energy market. The license carries a seventy-five year term, subject to earlier termination upon mutual agreement of the parties, or by us in connection with the insolvency of the licensor.
We also license digital intellectual property cores, or IP blocks, for integration into and distribution with certain electronic components built into our products, including our ASICs, complex programmable logic devices, or CPLDs, and field-programmable gate arrays, or FPGAs. This is a fully-paid, non-exclusive, non-transferable, royalty-free license providing for the integration of such digital IP blocks in an unlimited number of electronic component designs and the distribution of such electronic components with our products. Other than in connection with the distribution of our products, our use of such digital IP blocks is limited to certain of our business sites. The license is perpetual, subject to earlier termination by either party upon the termination, suspension or insolvency of the other party’s business, or by the licensor upon a breach of the license agreement by us. In addition, we license open source software from third parties for integration into our Envoy products. Such open source software is licensed under open source licenses. These licenses are perpetual and require us to attribute the source of the software to the original software developer, which we provide via our website.
We continually assess the need for patent protection for those aspects of our technology, designs and methodologies and processes that we believe provide significant competitive advantages. A majority of our patents relate to DC to AC power conversion for alternative energy power systems, as well as power system monitoring, control and management systems.
With respect to, among other things, proprietary know-how that is not patentable and processes for which patents are difficult to enforce, we rely on trade secret protection and confidentiality agreements to safeguard our interests. We believe that many elements of our microinverter manufacturing process involve proprietary know-how, technology or data that are not covered by patents or patent applications, including technical processes, test equipment designs, algorithms and procedures.
 
All of our research and development personnel have entered into confidentiality and proprietary information agreements with us. These agreements address intellectual property protection issues and require our employees to assign to us all of the inventions, designs and technologies they develop during the course of employment with us.  
We also require our customers and business partners to enter into confidentiality agreements before we disclose any sensitive aspects of our microinverter, technology or business plans.
Seasonality

Historically, sales of our products in the second, third and, to a lesser extent, fourth quarters have been positively affected by seasonal customer demand trends, including solar economic incentives, weather patterns and construction cycles, followed by a seasonally softer first quarter . Although these seasonal factors are common in the solar sector, historical patterns should not be considered a reliable indicator of our future sales activity or performance.

6

Table of Contents

Competition
The markets for our products are highly competitive, and we compete with traditional inverter manufacturers and new technology start-ups. The principal areas in which we compete with other companies include:
Product performance and features;
Total cost of ownership;
Breadth of product line;
Local sales and distribution capabilities;
Module compatibility and interoperability;
Reliability and duration of product warranty;
Technological expertise;
Brand recognition and customer service and support;
Compliance with industry standards and certifications;
Compliance with current and planned local electrical codes;
Integration with storage offerings;
Size and financial stability of operations;
Size of installed base; and
Local manufacturing and product content.
Competitors in the inverter market are, amongst others, SMA Solar Technology AG, Fronius International GmbH, ABB Ltd. and SolarEdge Technologies, Inc., and other emerging companies offering alternative microinverter, DC to DC optimizer and other power electronic solutions. We principally compete with the large, incumbent solar inverter companies because traditional central inverter solutions can be used as alternatives to our microinverter solution. We believe, however, that our microinverter solutions offer significant advantages and competitive differentiation relative to traditional central or string inverter technology, even when traditional central or string inverter technology is supplemented by DC-to-DC optimizers. Competitors in the storage market are currently emerging and may include producers of battery cells and other integrated storage systems.
Employees
 
As of December 31, 2016 , we had 430 full-time employees. Of the full-time employees, 202 were engaged in research and development, 136 in sales and marketing, 46 in a general and administrative capacity and 46 in manufacturing and operations. Of these employees, 357 were in the United States, 21 in Europe, 33 in New Zealand, 17 in Australia and two employees in Canada.
 
None of our U.S., New Zealand, U.K., and Australia employees are represented by a labor union with respect to his or her employment with us; however, our employees in France are represented by a collective bargaining agreement. We have not experienced any employment-related work stoppages, and we consider our relations with our employees to be good.
 
Available Information
 
We file electronically with the U.S. Securities and Exchange Commission, or SEC, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, or the Exchange Act. We make available on our website at www.enphase.com (under “Investors-Financial Information-SEC Filings”), free of charge, copies of these reports as soon as reasonably practicable after filing these reports with, or furnishing them to, the SEC. The contents of our websites are not incorporated by reference into this Annual Report on Form 10-K or in any other report or document we file with the SEC, and any references to our websites are intended to be inactive textual references only.

7

Table of Contents

Item 1A.      Risk Factors
We have identified the following risks and uncertainties that may have a material adverse effect on our business, financial condition or results of operations. The risks described below are not the only ones we face. Additional risks not presently known to us or that we currently believe are not material may also significantly impair our business operations. Our business could be harmed by any of these risks. The trading price of our common stock could decline due to any of these risks, and you may lose all or part of your investment. In assessing these risks, you should also refer to the other information contained in this Annual Report on Form 10-K, including our consolidated financial statements and related notes.
We may not be able to raise additional capital to execute on our current or future business opportunities on favorable terms, if at all, or without dilution to our stockholders.
We have disclosed our conclusion under ASU 2014-15, “Presentation of Financial Statements - Going Concern” that there is substantial doubt about our ability to continue as a going concern and our plans to mitigate the conditions that led to that conclusion. Therefore, we may need to raise additional capital to execute on our current or future business strategies, including to:
fund our operations;
invest in our research and development efforts;
expand our operations into new product markets and new geographies;
acquire complementary businesses, products, services or technologies; or
otherwise pursue our strategic plans and respond to competitive pressures.
We do not know what forms of financing, if any, will be available to us, and the determination that there is substantial doubt about our ability to continue as a going concern could impair our ability to raise financing, if needed. If financing is not available on acceptable terms, if and when needed, our ability to fund our operations, enhance our research and development and sales and marketing functions, develop and enhance our products, respond to unanticipated events, including unanticipated opportunities, or otherwise respond to competitive pressures would be significantly limited. In any such event, our business, financial condition and results of operations could be materially harmed, and we may be unable to continue our operations. Moreover, if we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our stockholders could be significantly diluted, and these newly issued securities may have rights, preferences or privileges senior to those of existing stockholders. If we fail to raise sufficient additional capital if needed, we may not be able to completely execute our business plan and may not be able to continue as a going concern .
We have a history of losses which may continue in the future, and we cannot be certain that we will achieve or sustain profitability or be able to continue as a going concern.
We have incurred substantial net losses since our inception, and we may continue to incur additional losses in the future. For the years ended December 31, 2016 , 2015 and 2014 , we incurred net losses of $67.5 million , $22.1 million and $8.1 million , respectively. At December 31, 2016 , we had an accumulated deficit of $250.5 million . Our revenue growth may slow or revenue may decline for a number of possible reasons, many of which are outside our control, including a decline in demand for our offerings, increased competition, a decrease in the growth of the solar industry or our market share, or our failure to capitalize on growth opportunities. If we fail to generate sufficient revenue to support our operations, we may not be able to achieve or sustain profitability. In connection with the issuance of our consolidated financial statements for the year ended December 31, 2016, we concluded that there is substantial doubt regarding our ability to continue as a going concern. While we have taken and continue to take steps to improve our financial position since December 31, 2016 (including raising additional capital and further reducing expenses), there can be no assurance that these steps will be sufficient and we could fail to continue as a going concern. Furthermore, if we require additional capital to finance our operations, this determination could impair our ability to finance our operations through the sale of equity, incurring debt, or other financing alternatives.
The rapidly changing solar industry makes it difficult to evaluate our current business and future prospects.
The rapidly changing solar industry makes it difficult to evaluate our current business and future prospects. We have encountered and will continue to encounter risks and difficulties frequently experienced by growing

8

Table of Contents

companies in rapidly changing industries, including increased expenses as we continue to grow our business. If we do not manage these risks and overcome these difficulties successfully, our business will suffer.
Since we began commercial shipments of our products, our revenue, gross profit and results of operations have varied and are likely to continue to vary from quarter to quarter due to a number of factors, many of which are not within our control. It is difficult for us to accurately forecast our future revenue and gross profit and plan expenses accordingly and, therefore, it is difficult for us to predict our future results of operations.
If demand for solar energy solutions does not continue to grow or grows at a slower rate than we anticipate, our business will suffer.
Our microinverter and AC Battery storage systems are utilized in solar photovoltaic, or PV, installations, which provide on-site distributed power generation. As a result, our future success depends on continued demand for solar energy solutions and the ability of solar equipment vendors to meet this demand. The solar industry is an evolving industry that has experienced substantial changes in recent years , and we cannot be certain that consumers and businesses will adopt solar PV systems as an alternative energy source at levels sufficient to continue to grow our business. Traditional electricity distribution is based on the regulated industry model whereby businesses and consumers obtain their electricity from a government regulated utility. For alternative methods of distributed power to succeed, businesses and consumers must adopt new purchasing practices. The viability and continued growth in demand for solar energy solutions, and in turn, our products, may be impacted by many factors outside of our control, including:
market acceptance of solar PV systems based on our product platform;
cost competitiveness, reliability and performance of solar PV systems compared to conventional and non-solar renewable energy sources and products;
availability and amount of government subsidies and incentives to support the development and deployment of solar energy solutions;
the extent to which the electric power industry and broader energy industries are deregulated to permit broader adoption of solar electricity generation;
the cost and availability of key raw materials and components used in the production of solar PV systems;
prices of traditional utility-provided energy sources;
levels of investment by end-users of solar energy products, which tend to decrease when economic growth slows; and
the emergence, continuance or success of, or increased government support for, other alternative energy generation technologies and products.
If demand for solar energy solutions does not grow, demand for our customers' products as well as demand for our products will decrease, which would have an adverse impact on our ability to increase our revenue and grow our business.
Short-term demand and supply imbalances, especially for solar module technology, have recently caused prices for solar technology solutions to decline rapidly. Furthermore, competition in the solar industry has increased due to the emergence of lower-cost manufacturers along the entire solar value chain causing further price declines, excess inventory and oversupply. These market disruptions may continue to occur and may increase pressure to reduce prices, which could adversely affect our business and financial results.
The loss of, or events affecting, one of our major customers could reduce our sales and have a material adverse effect on our business, financial condition and results of operations.
In 2016, CED Greentech accounted for approximately 18% of total net revenues. In 2015, CED Greentech and Vivint Solar, Inc. accounted for approximately 17% and 12% of total net revenues, respectively. Our customers’ decisions to purchase our products are influenced by a number of factors outside of our control, including retail energy prices and government regulation and incentives, among others. Although we have agreements with some of our largest customers, these agreements generally do not have long-term purchase commitments and are generally terminable by either party after a relatively short notice period. In addition, these customers may decide to no longer use, or to reduce the use of, our products and services for other reasons that may be out of our control. For example, beginning in 2015, Vivint Solar, Inc. implemented a multi-sourcing

9

Table of Contents

strategy, and therefore, is not sole-sourcing our microinverters, which has resulted in and may continue to result in a reduction in our revenue generated from sales to Vivint. In addition, adverse events affecting our customers could also adversely affect our revenue and results of operations (for instance, the recent filing of a voluntary petition for bankruptcy protection by one of our customers prevented us from timely collection of our accounts receivable from that customer).  The loss of, or events affecting, Vivint or one or more of our other large customers have had, could have and could continue to have a material adverse effect on our business, financial condition and results of operations.
Our gross profit may fluctuate over time, which could impair our ability to achieve or maintain profitability.
Our gross profit has varied in the past and is likely to continue to vary significantly from period to period. Our gross profit may be adversely affected by numerous factors, some of which are beyond our control, including:
changes in customer, geographic or product mix;
increased price competition, including the impact of customer and competitor discounts and rebates;
our ability to reduce and control product costs, including our ability to make product cost reductions in a timely manner to offset declines in our product prices;
warranty costs and reserves, including changes resulting from changes in estimates related to the long-term performance of our products, product replacement costs and warranty claim rates;
loss of cost savings due to changes in component or raw material pricing or charges incurred due to inventory holding periods if product demand is not correctly anticipated;
introduction of new products;
ordering patterns from our distributors;
price reductions on older products to sell remaining inventory;
our ability to reduce production costs, such as through technology innovations, in order to offset price declines in our products over time;
changes in shipment volume;
changes in distribution channels;
excess and obsolete inventory and inventory holding charges;
expediting costs incurred to meet customer delivery requirements; and
fluctuations in foreign currency exchange rates.
Fluctuations in gross profit may adversely affect our ability to manage our business or achieve or maintain profitability.
We are under continuous pressure to reduce the prices of our products, which has adversely affected, and may continue to adversely affect, our gross margins.
The solar power industry has been characterized by declining product prices over time. We have reduced the prices of our products in the past, and we expect to continue to experience pricing pressure for our products in the future, including from our major customers. In addition, we have reduced our prices ahead of planned cost reductions of our products, which has adversely affected our gross margins. When seeking to maintain or increase their market share, our competitors may also reduce the prices of their products. In addition, our customers may have the ability or seek to internally develop and manufacture competing products at a lower cost than we would otherwise charge, which would add additional pressure on us to lower our selling prices. If we are unable to offset any future reductions in our average selling prices by increasing our sales volume, reducing our costs and expenses or introducing new products, our gross margins would continue to be adversely affected.
Given the general downward pressure on prices for our products driven by competitive pressure and technological change, a principal component of our business strategy is reducing the costs to manufacture our products to remain competitive. If our competitors are able to drive down their manufacturing costs faster than we can or increase the efficiency of their products, our products may become less competitive even when adjusted for efficiency. Further, if raw materials costs and other third-party component costs were to increase, we may not meet our cost reduction targets. If we cannot effectively execute our cost reduction roadmap, we may not be able to remain price competitive, which would result in lost market share and lower gross margins.

10

Table of Contents

The inverter industry is highly competitive and we expect to face increased competition as new and existing competitors introduce products, which could negatively impact our results of operations and market share.
The market for PV inverter solutions is highly competitive. To date, we have competed primarily against central and string inverter manufacturers, but as the solar industry rapidly grows, new solutions and technologies are emerging that will directly compete with our business. Competitors in the inverter market include, amongst others, SMA Solar Technology AG, Fronius International GmbH, ABB Ltd. and SolarEdge Technologies, Inc.. Other existing or emerging companies, such as Huawei Technologies Co. Ltd., may also begin offering alternative microinverter, DC to DC optimizer and other power electronic solutions.
Competition has intensified, and we expect the trend to continue as new and existing competitors enter the microinverter market, or market and sell related products, such as DC to DC optimizers that can be used in conjunction with central or string inverters. SMA Solar Technology AG and ABB Ltd. market and sell microinverter products, and several new entrants to the microinverter market have recently announced plans to ship or have already shipped products. We believe that a number of companies have developed or are developing microinverters and other products that will compete directly with our microinverter systems in the module-level power electronics, or MLPE market, including low-cost manufacturers such as Huawei Technologies Co. Ltd.. In addition, central and string inverter manufacturers continue to reduce their prices, putting additional pressure on us and other alternative technologies.
Several of our existing and potential competitors are significantly larger than we are and may have greater financial, marketing, distribution, and customer support resources, and may have significantly broader brand recognition, especially in certain markets. In addition, some of our competitors have more resources and experience in developing or acquiring new products and technologies and creating market awareness for these offerings. Further, certain competitors may be able to develop new products more quickly than we can and may be able to develop products that are more reliable or that provide more functionality than ours. In addition, some of our competitors have the financial resources to offer competitive products at aggressive or below-market pricing levels, which could cause us to lose sales or market share or require us to lower prices of our products in order to compete effectively. Suppliers of solar products, particularly solar modules, have experienced eroding prices over the last several years and as a result many have faced margin compression and declining revenues. If we have to reduce our prices by more than we anticipate, or if we are unable to offset any future reductions in our average selling prices by increasing our sales volume, reducing our costs and expenses or introducing new products, our revenues and gross profit would suffer.
We also may face competition from some of our customers or potential customers who evaluate our capabilities against the merits of manufacturing products internally. For instance, SunPower Corporation acquired a microinverter company SolarBridge Technologies, Inc. in November of 2014. Other solar module manufacturers could also develop or acquire competing inverter technology or attempt to develop components that directly perform DC to AC conversion in the module itself. Due to the fact that such customers may not seek to make a profit directly from the manufacture of these products, they may have the ability to manufacture competitive products at a lower cost than we would charge such customers. As a result, these customers or potential customers may purchase fewer of our microinverter systems or sell products that compete with our microinverters systems, which would negatively impact our revenue and gross profit.

Developments in alternative technologies or improvements in distributed solar energy generation may have a material adverse effect on demand for our offerings.
Significant developments in alternative technologies, such as advances in other forms of distributed solar PV power generation, storage solutions such as batteries, the widespread use or adoption of fuel cells for residential or commercial properties or improvements in other forms of centralized power production may have a material adverse effect on our business and prospects. Any failure by us to adopt new or enhanced technologies or processes, or to react to changes in existing technologies, could result in product obsolescence, the loss of competitiveness of our products, decreased revenue and a loss of market share to competitors.
Our microinverter systems, including our AC Battery storage solution, may not achieve broader market acceptance, which would prevent us from increasing our revenue and market share.

11

Table of Contents

If we fail to achieve broader market acceptance of our products, there would be an adverse impact on our ability to increase our revenue, gain market share and achieve and sustain profitability. Our ability to achieve broader market acceptance for our products will be impacted by a number of factors, including:
our ability to produce microinverter systems and AC Battery storage products that compete favorably against other solutions on the basis of price, quality, reliability and performance;
our ability to timely introduce and complete new designs and timely qualify and certify our products;
whether installers, system owners and solar financing providers will continue to adopt our microinverter systems, which have a relatively limited history with respect to reliability and performance;
whether installers, system owners and solar financing providers will adopt our AC Battery storage solution, which is a new technology with a limited history with respect to reliability and performance;
the ability of prospective system owners to obtain long-term financing for solar PV installations based on our product platform on acceptable terms or at all;
our ability to develop products that comply with local standards and regulatory requirements, as well as potential in-country manufacturing requirements; and
our ability to develop and maintain successful relationships with our customers and suppliers.
In addition, our ability to achieve increased market share will depend on our ability to increase sales to established solar installers, who have traditionally sold central or string inverters. These installers often have made substantial investments in design, installation resources and training in traditional central or string inverter systems, which may create challenges for us to achieve their adoption of our microinverter systems.
The reduction, elimination or expiration of government subsidies and economic incentives for on-grid solar electricity applications could reduce demand for solar PV systems and harm our business.
The market for on-grid applications, where solar power is used to supplement a customer’s electricity purchased from the utility network or sold to a utility under tariff, depends in large part on the availability and size of government and economic incentives that vary by geographic market. Because our customers’ sales are typically into the on-grid market, the reduction, elimination or expiration of government subsidies and economic incentives for on-grid solar electricity may negatively affect the competitiveness of solar electricity relative to conventional and non-solar renewable sources of electricity, and could harm or halt the growth of the solar electricity industry and our business.
In general, the cost of solar power currently exceeds retail electricity rates, and we believe this tendency will continue in the near term. As a result, national, state and local government bodies in many countries, most notably Australia, Canada, France, Belgium, Germany, Italy, Japan, the People’s Republic of China, Spain and the United States, have provided incentives in the form of feed-in tariffs, or FiTs, rebates, tax credits and other incentives to system owners, distributors, system integrators and manufacturers of solar PV systems to promote the use of solar electricity in on-grid applications and to reduce dependency on other forms of energy. Many of these government incentives expire, phase out over time, terminate upon the exhaustion of the allocated funding, require renewal by the applicable authority or are being changed by governments due to changing market circumstances or changes to national, state or local energy policy.
Electric utility companies or generators of electricity from other non-solar renewable sources of electricity may successfully lobby for changes in the relevant legislation in their markets that are harmful to the solar industry. Reductions in, or eliminations or expirations of, governmental incentives in regions that we focus our sales efforts could result in decreased demand for and lower revenue from solar PV systems there, which would adversely affect sales of our products. In addition, our ability to successfully penetrate new geographic markets may depend on new countries adopting and maintaining incentives to promote solar electricity, to the extent such incentives are not currently in place. Additionally, electric utility companies may establish pricing structures or interconnection requirements that could adversely affect our sales and be harmful to the solar and distributed rooftop solar generation industry.
Actions by the new presidential administration with regard to the solar energy sector or international trade agreements could materially harm our business, financial condition and results of operations.


12

Table of Contents

The recent change in the U.S. presidential administration may create regulatory uncertainty in the clean energy sector generally and the solar energy sector in particular. If the new administration and/or the U.S. Congress take action to eliminate or reduce legislation, regulations and incentives supporting solar energy, such actions may result in a decrease in demand for solar energy in the United States and other geographical markets, which could materially harm our business, financial condition and results of operations.
Furthermore, a significant portion of our business activities are conducted in foreign countries, including Mexico, Canada and China. During the 2016 election campaign, the new president made comments suggesting that he was not supportive of certain existing international trade agreements, including the North American Free Trade Agreement (“NAFTA”). At this time, it remains unclear what the new administration or the U.S. Congress may or may not do with respect to these international trade agreements. If the new administration takes action to impose any border tariff or to withdraw from or materially modify NAFTA or certain other international trade agreements, our business, financial condition and results of operations could be adversely affected.
*If we do not forecast demand for our products accurately, we may experience product shortages, delays in product shipment, excess product inventory, or difficulties in planning expenses, any of which will adversely affect our business and financial condition.
We manufacture our products according to our estimates of customer demand. This process requires us to make multiple forecasts and assumptions relating to the demand of our distributors, their end customers and general market conditions. Because we sell most of our products to distributors, who in turn sell to their end customers, we have limited visibility as to end-customer demand. We depend significantly on our distributors to provide us visibility into their end-customer demand, and we use these forecasts to make our own forecasts and planning decisions. If the information from our distributors turns out to be incorrect, then our own forecasts may also be inaccurate. Furthermore, we do not have long-term purchase commitments from our distributors or end customers, and our sales are generally made by purchase orders that may be canceled, changed or deferred without notice to us or penalty. As a result, it is difficult to forecast future customer demand to plan our operations.
If we overestimate demand for our products, or if purchase orders are canceled or shipments are delayed, we may have excess inventory that we cannot sell. We may have to make significant provisions for inventory write-downs based on events that are currently not known, and such provisions or any adjustments to such provisions could be material. Conversely, if we underestimate demand, we may not have sufficient inventory to meet end-customer demand, and we may lose market share, damage relationships with our distributors and end customers and forgo potential revenue opportunities. Obtaining additional supply in the face of product shortages may be costly or impossible, particularly in the short term and in light of our outsourced manufacturing processes, which could prevent us from fulfilling orders in a timely and cost efficient manner or at all. In addition, if we overestimate our production requirements, our contract manufacturers may purchase excess components and build excess inventory. If our contract manufacturers, at our request, purchase excess components that are unique to our products and are unable to recoup the costs of such excess through resale or return or build excess products, we could be required to pay for these excess parts or products and recognize related inventory write-downs.
In addition, we plan our operating expenses, including research and development expenses, hiring needs and inventory investments, in part on our estimates of customer demand and future revenue. If customer demand or revenue for a particular period is lower than we expect, we may not be able to proportionately reduce our fixed operating expenses for that period, which would harm our operating results for that period.
Our focus on a limited number of specific markets increases risks associated with the modification, elimination or expiration of governmental subsidies and economic incentives for on-grid solar electricity applications.
To date, we have generated the majority of our revenues from North America and expect to continue to generate a substantial amount of our revenues from North America in the future. There are a number of important incentives that are expected to phase-out or terminate in the future, which could adversely affect sales of our products. A substantial majority of our revenues come from the United States, which has both federal and state incentives. For instance, the Renewable Energy and Job Creation Act of 2008 currently provides a 30% federal tax credit for residential and commercial solar installations through December 31, 2019 and reduced tax credits of 26% and 22% through December 31, 2020 and 2021 respectively, before being reduced to 10% for commercial installations and 0% for residential installations beginning in 2022. These tax credits could be reduced or

13

Table of Contents

eliminated as part of tax code changes or regulatory reform initiatives by the new Congress and presidential administration.
In addition, net energy metering tariffs are being evaluated and in some instances modified which may have a negative impact on future inverter sales. We derive a significant portion of our revenues from California’s residential solar market and the existing California net energy metering tariff has been very successful in incentivizing the installation of residential solar systems. California, however, is re-evaluating existing incentives, tariffs and rates for residential systems in order to accommodate a sustainable growth trajectory for residential solar and to also encourage the adoption of other distributed energy resources, such as energy storage, that provide additional benefits to the consumer and the electricity grid. There is a risk that future regulatory changes do not adequately stimulate future growth in the residential solar market. We also sell our products in Europe. A number of European countries, including Germany, Belgium, Spain, Italy and the United Kingdom have adopted reductions or concluded their FiT programs. Certain countries, notably Greece and Spain, have proposed or enacted taxes levied on renewable energy. These and related developments have significantly impacted the solar industry in Europe and may adversely affect the future demand for the solar energy solutions in Europe.
We also sell our products in Australia. In 2012 Australia enacted a Renewable Energy Target (RET) that is intended to ensure that 33,000 Gigawatt-hours of Australia's electricity comes from renewable sources by 2020.  In 2013, Australia elected a new national government. The new leadership pledged to revise national energy policy, including potentially reducing Australia’s renewable energy target and revising certain renewable energy financing mechanisms. In July 2014, the new leadership successfully repealed the tax on carbon emissions. This has been replaced with the Direct Action Plan, which primarily provides funding to corporations to reduce emissions. States and territories in Australia have different feed in tariffs, and the gradual reduction of feed in tariffs in some states may reduce the incentive for homeowners to export unused solar energy produced back to the grid.
We also sell our products in Ontario, Canada. The Government of Ontario has the authority to change the FiTs for future contracts at its discretion and has the authority to modify, suspend, or discontinue the program at any time. Suspension of the FiT program in Ontario directly impacted and could continue to impact our business. Furthermore, any future suspension or modification of the program could negatively affect our business, financial condition and results of operations.
We believe the Federal and State tax credits, applicable federal and state grants, applicable tariffs and other incentive programs have had a positive effect on our sales since inception. However, unless these programs are further extended or modified to allow for continued growth in the residential solar market, the phase-out of such programs could adversely affect sales of our products in the future. The reductions in incentives and uncertainty around future energy policy, including local content requirements, have negatively affected and may continue to negatively affect our business, financial condition, and results of operations as we seek to increase our business domestically and abroad. Additionally, as we further expand to other countries, changes in incentive programs or electricity policies could negatively affect returns on our investments in those countries as well as our business, financial condition, and results of operations.
Changes in current laws or regulations or the imposition of new laws or regulations, or new interpretations thereof, by federal or state agencies or foreign governments could impair our ability to compete in international markets.
Changes in current laws or regulations applicable to us or the imposition of new laws and regulations in the United States, Canada, Mexico and certain Central American markets, France, the Benelux region, certain other European markets, Australia, New Zealand and certain other Asian markets, could materially and adversely affect our business, financial condition and results of operations. In addition, changes in our products or changes in export and import laws and implementing regulations may create delays in the introduction of new products in international markets, prevent our customers from deploying our products internationally or, in some cases, prevent the export or import of our products to certain countries altogether.
For example, the Italian energy authority (AEEG) enacted a new set of interconnection standards for solar energy installations that became effective in July 2012, which has negatively impacted our sales in Italy. We continue to explore potential solutions to meet these requirements. However, in the event that we cannot

14

Table of Contents

implement a solution in the near term the total market available for our microinverter products in Italy, and our business as a result, may continue to be adversely impacted.
In addition, several states or territories, including California, Hawaii and Queensland, Australia, have either implemented or are considering implementing new restrictions on incentives or rules regulating the installation of solar systems that we may not be able to currently comply with. In the event that we cannot comply with these or other new regulations or implement a solution to such noncompliance as they arise, the total market available for our microinverter products in such states, and our business as a result, may be adversely impacted.
While we are not aware of any other current or proposed export or import regulations that would materially restrict our ability to sell our products in countries where we offer our products for sale, any change in export or import regulations or related legislation, shift in approach to the enforcement or scope of existing regulations, or change in the countries, persons or technologies targeted by these regulations, could result in decreased use of our products by, or in our decreased ability to export or sell our products to, existing or potential customers with international operations. In such event, our business and results of operations could be adversely affected.
The threat of continuing global economic, capital markets and credit disruptions, including sovereign debt issues, pose risks for our business.
The threat of continuing global economic, capital markets and credit disruptions, including the sovereign debt issues in Europe, pose risks for our business. These risks include slower economic activity and investment in projects that make use of our products and services. These economic developments, particularly decreased credit availability, have reduced demand for solar products. The European sovereign debt crisis has caused and may continue to cause European governments to reduce, eliminate or allow to expire government subsidies and economic incentives for solar energy, which could limit our growth or cause our net sales to decline and materially and adversely affect our business, financial condition, and results of operations. These conditions, including reduced incentives, continued decreases in credit availability, as well as continued economic instability, have and may continue to adversely impact our business, financial condition and results of operations as we seek to increase our sales in Europe.
A drop in the retail price of electricity derived from the utility grid or from alternative energy sources, or a change in utility pricing structures, may harm our business, financial condition and results of operations.
We believe that a system owner’s decision to purchase a solar PV system is strongly influenced by the cost of electricity generated by solar PV installations relative to the retail price of electricity from the utility grid and the cost of other renewable energy sources, including electricity from solar PV installations using central inverters. Decreases in the retail prices of electricity from the utility grid would make it more difficult for all solar PV systems to compete. In particular, growth in unconventional natural gas production and an increase in global liquefied natural gas capacity are expected to keep natural gas prices relatively low for the foreseeable future. Persistent low natural gas prices, lower prices of electricity produced from other energy sources, such as nuclear power, or improvements to the utility infrastructure could reduce the retail price of electricity from the utility grid, making the purchase of solar PV systems less economically attractive and lowering sales of our products. In addition, energy conservation technologies and public initiatives to reduce demand for electricity also could cause a fall in the retail price of electricity from the utility grid. Moreover, technological developments by our competitors in the solar components industry, including manufacturers of central inverters and DC to DC optimizers, could allow these competitors or their partners to offer electricity at costs lower than those that can be achieved from solar PV installations based on our product platform, which could result in reduced demand for our products. Additionally, as increasing adoption of distributed generation places pressure on traditional utility business models or utility infrastructure, utilities may change their pricing structures to make installation or operation of solar distributed generation more costly. Such measures can include grid access fees, costly or lengthy interconnection studies, limitations on distributed generation penetration levels, or other measures. If the cost of electricity generated by solar PV installations incorporating our microinverter systems is high relative to the cost of electricity from other sources, our business, financial condition and results of operations may be harmed.
Problems with product quality or product performance may cause us to continue to incur additional warranty expenses and may damage our market reputation and cause our revenue and gross profit to decline.

15

Table of Contents

We have offered 15-year limited warranties for our first and second generation microinverters and offer a limited warranty of up to 25 years on each subsequent generation microinverters. Our limited warranties cover defects in materials and workmanship of our microinverters under normal use and service conditions for up to 25 years following installation. As a result, we bear the risk of warranty claims long after we have sold the product and recognized revenue. Our estimated costs of warranty for previously sold products may change to the extent future products are not compatible with earlier generation products under warranty.
While we offer warranties of up to 25 years, our microinverters have only been in use since mid-2008, when we first commenced commercial sales of our products. Although we conduct accelerated life cycle testing to measure performance and reliability, our microinverter systems have not been tested over the full warranty cycle and do not have a sufficient operating history to confirm how they will perform over their estimated useful life. In addition, under real-world operating conditions, which may vary by location and design, as well as insolation, soiling and weather conditions, a typical solar PV installation may perform in a different way than under standard test conditions. If our products perform below expectations or have unexpected reliability problems, we may be unable to gain or retain customers and could face substantial warranty expense.
We are required to make assumptions and apply judgments, based on our accelerated life cycle testing and the limited operating history of our products, regarding a number of factors, including the durability and reliability of our products, our anticipated rate of warranty claims and the costs of replacement of defective products. Our assumptions have proved and could in the future prove to be materially different from the actual performance of our products, which has caused and may in the future cause us to incur substantial expense to repair or replace defective products. Increases in our estimates of future warranty obligations due to actual product failure rates, field service obligations and rework costs incurred in correcting product failures have caused and could in the future cause us to materially increase the amount of warranty obligations, and have had and may have in the future a corresponding negative impact on our results of operations.
We also depend significantly on our reputation for reliability and high-quality products and services, exceptional customer service and our brand name to attract new customers and grow our business. If our products and services do not perform as anticipated or we experience unexpected reliability problems or widespread product failures, our brand and reputation could be significantly impaired and we may lose, or be unable to gain or retain, customers.
Defects and poor performance in our products could result in loss of customers, decreased revenue and unexpected expenses, and we may face warranty, indemnity and product liability claims arising from defective products.
Our products must meet stringent quality requirements and may contain undetected errors or defects, especially when first introduced or when new generations are released. Errors, defects or poor performance can arise due to design flaws, defects in raw materials or components or manufacturing difficulties, which can affect both the quality and the yield of the product. These errors or defects may be dangerous, as defective power components may cause power overloads, potentially resulting in explosion or fire. As we develop new generations of our products and enter new markets, we face higher risk of undetected defects because our testing protocols may not be able to fully test the products under all possible operating conditions. In the past, we have experienced defects in our products due to certain errors in the manufacturing and design process. Any actual or perceived errors, defects or poor performance in our products could result in the replacement or recall of our products, shipment delays, rejection of our products, damage to our reputation, lost revenue, diversion of our engineering personnel from our product development efforts in order to address or remedy any defects and increases in customer service and support costs, all of which could have a material adverse effect on our business and operations.
Furthermore, defective, inefficient or poorly performing power components may give rise to warranty, indemnity or product liability claims against us that exceed any revenue or profit we receive from the affected products. We could incur significant costs and liabilities if we are sued and if damages are awarded against us. We currently maintain a moderate level of product liability insurance, and there can be no assurance that this insurance will provide sufficient coverage in the event of a claim. Also, we cannot predict whether we will be able to maintain this coverage on acceptable terms, if at all, or that a product liability claim would not harm our business or financial condition. Costs or payments we may make in connection with warranty and product liability claims or product recalls may adversely affect our financial condition and results of operations.

16

Table of Contents

Our Enlighten web-based monitoring service, which our customers use to track and monitor the performance of their solar PV systems based on our product platform, may contain undetected errors, failures, or bugs, especially when new versions or enhancements are released. We have from time to time found defects in our service and new errors in our existing service may be detected in the future. Any errors, defects, disruptions in service or other performance problems with our monitoring service could harm our reputation and may damage our customers’ businesses.
If we are unable to effectively manage our workforce, our business and operating results may suffer.
We have experienced, and expect to experience in the future, volatility in our sales and operations. Our historical growth and our more recent cost reduction initiatives have placed, and are expected to continue to place, significant demands on our management as well as our financial and operational resources, to:
manage a dynamic organization;
expand third-party manufacturing, testing and distribution capacity;
execute on our cost reduction efforts and product initiatives with reduced headcount;
build additional custom manufacturing test equipment;
manage an increasing number of relationships with customers, suppliers and other third parties;
increase our sales and marketing efforts;
train and manage a dynamic employee base;
broaden our customer support capabilities; and
implement new and upgrade existing operational and financial systems.
We cannot assure you that our current and planned operations, personnel, systems, internal procedures and controls will be adequate to support our future operations. If we cannot manage our sales and operations effectively, we may be unable to take advantage of market opportunities, execute our business strategies or respond to competitive pressures, any of which could have a material adverse effect on our financial condition, results of operations, business or prospects.
Our recent and planned expansion into new markets could subject us to additional business, financial and competitive risks.
We currently offer microinverter systems targeting the residential and commercial markets in the United States, Canada, Mexico and certain Central American markets, the United Kingdom, France, the Benelux region, certain other European markets, Australia, New Zealand and certain other Asian markets. We recently introduced our AC Battery storage solution in Australia, the United States, and the United Kingdom. We intend to expand into other international markets. Our success in these new geographic and product markets will depend on a number of factors, such as:
acceptance of microinverters in markets in which they have not traditionally been used;
our ability to compete in new product markets to which we are not accustomed;
our ability to manage manufacturing capacity and production;
willingness of our potential customers to incur a higher upfront capital investment than may be required for competing solutions;
timely qualification and certification of new products;
our ability to reduce production costs in order to price our products competitively over time;
availability of government subsidies and economic incentives for solar energy solutions;
accurate forecasting and effective management of inventory levels in line with anticipated product demand; and
our customer service capabilities and responsiveness.

17

Table of Contents

Further, new geographic markets and the larger commercial and utility-scale installation markets have different characteristics from the markets in which we currently sell products, and our success will depend on our ability to properly address these differences. These differences may include:
differing regulatory requirements, including tax laws, trade laws, labor, safety, local content, recycling and consumer protection regulations, tariffs, export quotas, customs duties or other trade restrictions;
limited or unfavorable intellectual property protection;
risk of change in international political or economic conditions;
restrictions on the repatriation of earnings;
fluctuations in the value of foreign currencies and interest rates;
difficulties and increased expenses in complying with a variety of U.S. and foreign laws, regulations and trade standards, including the Foreign Corrupt Practices Act;
potentially longer sales cycles;
higher volume requirements;
increased customer concentrations;
warranty expectations and product return policies; and
cost, performance and compatibility requirements.
Failure to develop and introduce these new products successfully, to generate sufficient revenue from these products to offset associated research and development, marketing and manufacturing costs, or to otherwise effectively anticipate and manage the risks and challenges associated with our potential expansion into new product and geographic markets, could adversely affect our revenues and our ability to achieve or sustain profitability.
Ordering patterns from our distributors may cause our revenue to fluctuate significantly from period to period.
Our distributors place purchase orders with us based on their assessment of end-customer demand and their forecasts. Because these forecasts may not be accurate, channel inventory held at our distributors may fluctuate significantly due to the difference between their forecasts and actual demand. As a result, distributors adjust their purchase orders placed with us in response to changing channel inventory levels, as well as their assessment of the latest market demand trends. We have limited visibility into future end customer demand. A significant decrease in our distributors’ channel inventory in one period may lead to a significant rebuilding of channel inventory in subsequent periods, or vice versa, which may cause our quarterly revenue and operating results to fluctuate significantly. This fluctuation may cause our results to fall short of analyst or investor expectations in a certain period, which may cause our stock price to decline.
We depend upon a small number of outside contract manufacturers. Our operations could be disrupted if we encounter problems with these contract manufacturers.
We do not have internal manufacturing capabilities, and rely upon a small number of contract manufacturers to build our products. In particular, we rely on contract manufacturers for the manufacture of microinverter products, cabling and our communications gateway related to our microinverter systems. Our reliance on a small number of contract manufacturers makes us vulnerable to possible capacity constraints and reduced control over component availability, delivery schedules, manufacturing yields and costs. We do not have long-term supply contracts with our other manufacturing partners. Consequently, these manufacturers are not obligated to supply products to us for any period, in any specified quantity or at any certain price.
The revenues that our contract manufacturers generate from our orders may represent a relatively small percentage of their overall revenues. As a result, fulfilling our orders may not be considered a priority in the event of constrained ability to fulfill all of their customer obligations in a timely manner. In addition, the facilities in which the vast majority of our microinverters, related cabling and communications gateway products are manufactured are located outside of the United States. We believe that the location of these facilities outside of the United States increases supply risk, including the risk of supply interruptions or reductions in manufacturing quality or controls.

18

Table of Contents

If any of our contract manufacturers were unable or unwilling to manufacture our products in required volumes and at high quality levels or renew existing terms under supply agreements, we would have to identify, qualify and select acceptable alternative contract manufacturers. An alternative contract manufacturer may not be available to us when needed or may not be in a position to satisfy our quality or production requirements on commercially reasonable terms, including price. Any significant interruption in manufacturing would require us to reduce our supply of products to our customers, which in turn would reduce our revenues, harm our relationships with our customers and damage our relationships with our distributors and end customers and cause us to forgo potential revenue opportunities.
Manufacturing problems could result in delays in product shipments to customers and could adversely affect our revenue, competitive position and reputation.
We may experience delays, disruptions or quality control problems in our manufacturing operations. Our product development, manufacturing and testing processes are complex and require significant technological and production process expertise. Such processes involve a number of precise steps from design to production. Any change in our processes could cause one or more production errors, requiring a temporary suspension or delay in our production line until the errors can be researched, identified and properly addressed and rectified. This may occur particularly as we introduce new products, modify our engineering and production techniques, and expand our capacity. In addition, our failure to maintain appropriate quality assurance processes could result in increased product failures, loss of customers, increased production costs and delays. Any of these developments could have a material adverse effect on our business, financial condition, and results of operations.
A disruption could also occur in our manufacturing partner’s fabrication facility due to any number of reasons, such as equipment failure, contaminated materials or process deviations, which could adversely impact manufacturing yields or delay product shipments. As a result, we could incur additional costs that would adversely affect our gross profit, and product shipments to our customers could be delayed beyond the shipment schedules requested by our customers, which would negatively affect our revenue, competitive position and reputation.
Additionally, manufacturing yields depend on a number of factors, including the stability and manufacturability of the product design, manufacturing improvements gained over cumulative production volumes and the quality and consistency of component parts. Capacity constraints, raw materials shortages, logistics issues, labor shortages, changes in customer requirements, manufacturing facilities or processes, or those of some third-party contract manufacturers and suppliers of raw materials and components have historically caused, and may in the future cause, reduced manufacturing yields, negatively impacting the gross profit on, and our production capacity for, those products. Moreover, an increase in the rejection and rework rate of products during the quality control process before, during or after manufacture would result in our experiencing lower yields, gross profit and production capacity.
The risks of these types of manufacturing problems are further increased during the introduction of new product lines, which has from time to time caused, and may in the future cause, temporary suspension of production lines while problems are addressed or corrected. Since our business is substantially dependent on a limited number of product lines, any prolonged or substantial suspension of manufacturing production lines could result in a material adverse effect on our revenue, gross profit, competitive position, and distributor and customer relationships.
We depend on sole source and limited source suppliers for key components and products. If we are unable to source these components on a timely basis, we will not be able to deliver our products to our customers.
We depend on sole source and limited source suppliers for key components of our products. For example, our ASICs are purchased from a sole source supplier or developed for us by sole source suppliers. Similarly, the battery cells for our AC Battery storage products are also currently sole sourced. Any of the sole source and limited source suppliers upon whom we rely could experience quality and reliability issues, could stop producing our components, cease operations or be acquired by, or enter into exclusive arrangements with, our competitors. We generally do not have long-term supply agreements with our suppliers, and our purchase volumes may currently be too low for us to be considered a priority customer by most of our suppliers. As a result, most of these suppliers could stop selling to us at commercially reasonable prices, or at all. Any such quality or reliability issue, or interruption or delay may force us to seek similar components or products from alternative sources, which may

19

Table of Contents

not be available on commercially reasonable terms, including price, or at all. Switching suppliers may require that we redesign our products to accommodate new components, and may potentially require us to re-qualify our products, which would be costly and time-consuming. Any interruption in the quality or supply of sole source or limited source components for our products would adversely affect our ability to meet scheduled product deliveries to our customers and could result in lost revenue or higher expenses and would harm our business.
If we or our contract manufacturers are unable to obtain raw materials in a timely manner or if the price of raw materials increases significantly, production time and product costs could increase, which may adversely affect our business.
The manufacturing and packaging processes used by our contract manufacturers depend on raw materials such as copper, aluminum, silicon and petroleum-based products. From time to time, suppliers may extend lead times, limit supplies or increase prices due to capacity constraints or other factors. Certain of our suppliers have the ability to pass along to us directly or through our contract manufacturers any increases in the price of raw materials. If the prices of these raw materials rise significantly, we may be unable to pass on the increased cost to our customers. While we may from time to time enter into hedging transactions to reduce our exposure to wide fluctuations in the cost of raw materials, the availability and effectiveness of these hedging transactions may be limited. Due to all these factors, our results of operations could be adversely affected if we or our contract manufacturers are unable to obtain adequate supplies of raw materials in a timely manner or at reasonable cost. In addition, from time to time, we or our contract manufacturers may need to reject raw materials that do not meet our specifications, resulting in potential delays or declines in output. Furthermore, problems with our raw materials may give rise to compatibility or performance issues in our products, which could lead to an increase in customer returns or product warranty claims. Errors or defects may arise from raw materials supplied by third parties that are beyond our detection or control, which could lead to additional customer returns or product warranty claims that may adversely affect our business and results of operations.
If potential owners of solar PV systems based on our product platform are unable to secure financing on acceptable terms, we could experience a reduction in the demand for our solar PV systems.
Many owners of solar PV systems depend on financing to purchase their systems. The limited use of microinverters to date, coupled with our relatively smaller size and capitalization compared to some of our competitors, could result in lenders refusing to provide the financing necessary to purchase solar PV systems based on our product platform on favorable terms, or at all. Moreover, in the case of debt financed projects, even if lenders are willing to finance the purchase of these systems, an increase in interest rates or a change in tax incentives could make it difficult for owners to secure the financing necessary to purchase a solar PV system on favorable terms, or at all. In addition, we believe that a significant percentage of owners purchase solar PV systems as an investment, funding the initial capital expenditure through a combination of upfront cash and financing. Difficulties in obtaining financing for solar PV systems on favorable terms, or increases in interest rates or changes in tax incentives, could lower an investor’s return on investment in a solar PV system, or make alternative solar PV systems or other investments more attractive relative to solar PV systems based on our product platform. Any of these events could result in reduced demand for our products, which could have a material adverse effect on our financial condition and results of operations. In addition, a significant share of residential solar installations has been provided through third party financing structures, such as power purchase or lease agreements. Our sales growth may depend on sales to developers of third party solar finance offerings who provide solar as a service via power purchase agreements or leasing structures. The third party finance market for residential solar in the United States and elsewhere is or may become highly concentrated, with a few significant finance companies and several smaller entrants. If we are unable develop relationships and gain a significant share of inverter sales to the major finance companies or new entrants, our overall sales growth could be constrained.
We rely primarily on distributors, large installers and providers of solar financing to assist in selling our products, and the failure of these customers to perform as expected could reduce our future revenue.
We sell our microinverter systems primarily through distributors, as well as through direct sales to solar equipment installers and sales to developers of third party solar finance offerings. We do not have exclusive arrangements with these third parties and, as a result, many of our customers also use or market and sell products from our competitors, which may reduce our sales. Our customers may generally terminate their relationships with us at any time, or with short notice. Our customers may fail to devote resources necessary to

20

Table of Contents

sell our products at the prices, in the volumes and within the time frames that we expect, or may focus their marketing and sales efforts on products of our competitors. In addition, participants in the solar industry are becoming increasingly focused on vertical integration of the solar financing and installation process, which may lead to an overall reduction in the number of potential parties who may purchase and install our products.
Our future performance depends on our ability to effectively manage our relationships with our existing customers, as well as to attract additional customers that will be able to market and support our products effectively, especially in markets in which we have not previously distributed our products. Termination of agreements with current customers, failure by these customers to perform as expected, or failure by us to cultivate new customer relationships, could hinder our ability to expand our operations and harm our revenue and operating results.
We may fail to capture customers in the new product and geographic markets that we are pursuing.
We are pursuing opportunities in energy management and energy storage which are highly competitive markets. We have made investments in our infrastructure, increased our operating costs and forgone other business opportunities in order to seek opportunities in these areas and will continue to do so. Any new product is subject to certain risks, including component sourcing, strategic partner selection and execution, customer acceptance, competition, product differentiation, market timing, challenges relating to economies of scale in component sourcing and the ability to attract and retain qualified personnel. There can be no assurance that we will be able to develop and grow these or any other new concepts to a point where they will become profitable, or generate positive cash flow. If we fail to execute on our plan with respect to new product introductions, these new potential business segments fail to translate into revenue in the quantities or timeline projected, thus, having a materially adverse impact on our revenue, operating results and financial stability. In addition, we are pursuing new geographic markets. The inability to capture new customers in the high-growth geographic markets could have a material adverse effect on our business, financial condition or results of operations.
Our success in an “AC module” version of our microinverter system may depend in part upon our ability to continue to work closely with leading solar module manufacturers.
We are currently working on variants of our microinverter system that will enable an “AC module” for direct attachment of the microinverter to the solar modules. The market success of such solutions will depend in part on our ability to continue to work closely with solar module manufacturers to design solar modules that are compatible with such direct attachment of our microinverter. We may not be able to encourage solar module manufacturers to work with us on the development of such compatible solutions combining our microinverter system and solar modules for a variety of reasons, including differences in marketing or selling strategy, competitive considerations, lack of competitive pricing, and technological compatibility. In addition, our ability to form effective partnerships with solar module manufacturers may be adversely affected by the substantial changes faced by many of these manufacturers due to declining prices and revenues from sales of solar modules.
If we fail to retain our key personnel or if we fail to attract additional qualified personnel, we may not be able to achieve our anticipated level of growth and our business could suffer.
Our future success and ability to implement our business strategy depends, in part, on our ability to attract and retain key personnel, and on the continued contributions of members of our senior management team and key technical personnel, each of whom would be difficult to replace. All of our employees, including our senior management, are free to terminate their employment relationships with us at any time. Competition for highly skilled technical people is extremely intense, and we face challenges identifying, hiring and retaining qualified personnel in many areas of our business. If we fail to retain our senior management and other key personnel or if we fail to attract additional qualified personnel, we may not be able to achieve our strategic objectives and our business could suffer.
If we fail to protect, or incur significant costs in defending, our intellectual property and other proprietary rights, our business and results of operations could be materially harmed.
Our success depends to a significant degree on our ability to protect our intellectual property and other proprietary rights. We rely on a combination of patent, trademark, copyright, trade secret and unfair competition laws, as well as confidentiality and license agreements and other contractual provisions, to establish and protect

21

Table of Contents

our intellectual property and other proprietary rights. We have applied for patent and trademark registrations in the United States and in certain other countries, some of which have been issued. We cannot guarantee that any of our pending applications will be approved or that our existing and future intellectual property rights will be sufficiently broad to protect our proprietary technology, and any failure to obtain such approvals or finding that our intellectual property rights are invalid or unenforceable could force us to, among other things, rebrand or re-design our affected products. In countries where we have not applied for patent protection or where effective intellectual property protection is not available to the same extent as in the United States, we may be at greater risk that our proprietary rights will be misappropriated, infringed or otherwise violated.
To protect our unregistered intellectual property, including our trade secrets and know-how, we rely in part on trade secret laws and confidentiality and invention assignment agreements with our employees and independent consultants. We also require other third parties who may have access to our proprietary technologies and information to enter into non-disclosure agreements. Such measures, however, provide only limited protection, and we cannot assure that our confidentiality and non-disclosure agreements will prevent unauthorized disclosure or use of our confidential information, especially after our employees or third parties end their employment or engagement with us, or provide us with an adequate remedy in the event of such disclosure. Furthermore, competitors or other third parties may independently discover our trade secrets, in which case we would not be able to assert trade secret rights, copy or reverse engineer our products or portions thereof or develop similar technology. If we fail to protect our intellectual property and other proprietary rights, or if such intellectual property and proprietary rights are infringed, misappropriated or otherwise violated, our business, results of operations or financial condition could be materially harmed.
In the future, we may need to take legal action to prevent third parties from infringing upon or misappropriating our intellectual property or from otherwise gaining access to our technology. Protecting and enforcing our intellectual property rights and determining their validity and scope could result in significant litigation costs and require significant time and attention from our technical and management personnel, which could significantly harm our business. In addition, we may not prevail in such proceedings. An adverse outcome of any such proceeding may reduce our competitive advantage or otherwise harm our financial condition and our business.
Third parties may assert that we are infringing upon their intellectual property rights, which could divert management’s attention, cause us to incur significant costs and prevent us from selling or using the technology to which such rights relate.
Our competitors and other third parties hold numerous patents related to technology used in our industry, and claims of patent or other intellectual property right infringement or violation have been litigated against certain of our competitors. From time to time we may also be subject to such claims and litigation. Regardless of their merit, responding to such claims can be time consuming, divert management’s attention and resources and may cause us to incur significant expenses. While we believe that our products and technology do not infringe in any material respect upon any valid intellectual property rights of third parties, we cannot be certain that we would be successful in defending against any such claims. Furthermore, patent applications in the United States and most other countries are confidential for a period of time before being published, so we cannot be certain that we are not infringing third parties’ patent rights or that we were the first to conceive or protect inventions covered by our patents or patent applications. An adverse outcome with respect to any intellectual property claim could invalidate our proprietary rights and force us to do one or more of the following:
obtain from a third party claiming infringement a license to sell or use the relevant technology, which may not be available on reasonable terms, or at all;
stop manufacturing, selling, incorporating or using our products that embody the asserted intellectual property;
pay substantial monetary damages;
indemnify our customers pursuant to indemnification obligations under some of our customer contracts; or
expend significant resources to redesign the products that use the infringing technology and to develop or acquire non-infringing technology.
Any of these actions could result in a substantial reduction in our revenue and could result in losses over an extended period of time.

22

Table of Contents

Our failure to obtain the right to use necessary third-party intellectual property rights on reasonable terms, or our failure to maintain, and comply with the terms and conditions applicable to these rights, could harm our business and prospects.
From time to time we have licensed, and in the future we may choose to or be required to license, technology or intellectual property from third parties in connection with the development of our products. We cannot assure that such licenses will be available to us on commercially reasonable terms, or at all, and our inability to obtain such licenses could require us to substitute technology of lower quality or of greater cost. In addition, we incorporate open source software code in our proprietary software. Use of open source software can lead to greater risks than use of third-party commercial software since open source licensors generally do not provide warranties or controls with respect to origin, functionality or other features of the software. Some open source software licenses require users who distribute open source software as part of their products to publicly disclose all or part of the source code in their software and make any derivative works of the open source code available for limited fees or at no cost. Although we monitor our use of open source software, open source license terms may be ambiguous, and many of the risks associated with the use of open source software cannot be eliminated. If we were found to have inappropriately used open source software, we may be required to release our proprietary source code, re-engineer our software, discontinue the sale of certain products in the event re-engineering cannot be accomplished on a timely basis or take other remedial action. Furthermore, if we are unable to obtain or maintain licenses from third parties or fail to comply with applicable open source licenses, we may be subject to costly third party claims of intellectual property infringement or ownership of our proprietary source code. Any of the foregoing could harm our business and put us at a competitive disadvantage.
Our business has been and could continue to be affected by seasonal trends and construction cycles.
We have been and could continue to be subject to industry-specific seasonal fluctuations, particularly in climates that experience colder weather during the winter months, such as northern Europe, Canada, and the United States. In general, we expect our products in the second, third, and fourth quarters will be positively affected by seasonal customer demand trends, including solar economic incentives, weather patterns and construction cycles, preceded by a seasonally softer first quarter. In the United States, customers will sometimes make purchasing decisions towards the end of the year in order to take advantage of tax credits or for budgetary reasons. In addition, construction levels are typically slower in colder months. In European countries with FiTs, the construction of solar PV systems may be concentrated during the second half of the calendar year, largely due to the annual reduction of the applicable minimum FiT and the fact that the coldest winter months are January through March. Accordingly, our business and quarterly results of operations could be affected by seasonal fluctuations in the future.
*Covenants in our credit facility and term loan may limit our flexibility in responding to business opportunities and competitive developments and increase our vulnerability to adverse economic or industry conditions.
We are a party to a term loan agreement with affiliates of Tennenbaum Capital Partners, LLC (“TCP”). This agreement restricts our ability to take certain actions such as incurring additional debt, encumbering our tangible or intangible property, paying dividends, or engaging in certain transactions, such as mergers and acquisitions, investments and asset sales. These restrictions may limit our flexibility in responding to business opportunities, competitive developments and adverse economic or industry conditions. In addition, our obligations under these agreements are secured by substantially all of our assets (excluding intellectual property), which limits our ability to provide collateral for additional financing. A breach of any of these covenants, or a failure to pay interest or indebtedness when due under any of our credit facilities, could result in a variety of adverse consequences, including the acceleration of our indebtedness and the forfeiture of our assets subject to security interests in favor of the lenders.

23

Table of Contents

We are an “emerging growth company,” and have elected to comply with reduced public company reporting requirements applicable to emerging growth companies, which could make our common stock less attractive to investors.
We are an “emerging growth company,” as defined in the Jumpstart Our Business Startups Act enacted in April 2012, or the JOBS Act. We have chosen to take advantage of exemptions from various reporting requirements applicable to other public companies but not to “emerging growth companies,” including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act of 2002, or Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved. We can continue to be an “emerging growth company” until December 31, 2017 (the last day of the fiscal year following the fifth anniversary of our initial public offering), although we could cease to be an “emerging growth company” earlier if certain events occur as specified in the JOBS Act, such as our achieving annual revenue of at least $1 billion or our becoming a “large accelerated filer” as defined in Rule 12b-2 of the Exchange Act. We cannot predict if investors will find our common stock less attractive because we have chosen to take advantage of these exemptions. If some investors find our common stock less attractive as a result of any choices to reduce future disclosure, there may be a less active trading market for our common stock and our stock price may be more volatile.
If we fail to maintain an effective system of internal controls or are unable to remediate any deficiencies in our internal controls, we might not be able to report our financial results accurately or prevent fraud; in that case, our stockholders could lose confidence in our financial reporting, which would harm our business and could negatively impact the price of our stock.
Effective internal controls are necessary for us to provide reliable financial reports and prevent fraud. In addition, Section 404 of the Sarbanes-Oxley Act requires us to establish and maintain internal control over financial reporting and disclosure controls procedures. The process of implementing our internal controls and complying with Section 404 of the Sarbanes-Oxley Act has required, and will continue to require, significant attention of management. Although we are currently not required to provide an auditor’s attestation report on management’s assessment of the effectiveness of our internal control over financial reporting, otherwise required by Section 404(b) of the Sarbanes-Oxley Act, this exemption will no longer be available to us beginning with our first Annual Report on 10-K for the year in which we cease to be an “emerging growth company,” as defined in the JOBS Act. If we or our independent registered public accounting firm discover a material weakness in the future, the disclosure of that fact, even if quickly remedied, could reduce the market’s confidence in our financial statements and harm our stock price. In addition, a delay in compliance with Section 404 of the Sarbanes-Oxley Act could subject us to a variety of administrative sanctions, including SEC action, ineligibility for short form resale registration, the suspension or delisting of our common stock from the stock exchange on which it is listed and the inability of registered broker-dealers to make a market in our common stock, which would further reduce our stock price and could harm our business. To the extent any material weaknesses in our internal control over financial reporting are identified in the future, we could be required to expend significant management time and financial resources to correct such material weaknesses or to respond to any resulting regulatory investigations or proceedings
Our ability to use net operating losses to reduce future tax payments may be limited by provisions of the Internal Revenue Code, and may be subject to further limitation as a result of future transactions.
Sections 382 and 383 of the Internal Revenue Code of 1986, as amended (the “Code”), contain rules that limit the ability of a company that undergoes an “ownership change,” generally defined as a more than 50 percentage point increase in the percentage of its stock owned by certain stockholders over a three-year period, to utilize its net operating loss and tax credit carryforwards and certain built-in losses recognized in the years after the ownership change. These rules generally operate by focusing on ownership changes involving stockholders who directly or indirectly own 5% or more of the stock of a company and any change in ownership arising from a new issuance of stock by the company. Generally, if an ownership change occurs, the yearly taxable income limitation on the use of net operating loss and tax credit carryforwards is equal to the product of the applicable long-term tax exempt rate and the value of the company’s stock immediately before the ownership change. If these limitations apply, we may be unable to offset our taxable income with net operating losses, or our tax liability with credits, before these losses and credits expire. We recently completed a study to assess whether an

24

Table of Contents

ownership change has occurred or whether there have been multiple ownership changes since we became a loss corporation under the Code. However, we do not anticipate these limitations will significantly impact our ability to utilize the net operating losses and tax credit carryforwards.
In addition, it is possible that future transactions (including issuances of new shares of our common stock and sales of shares of our common stock) will cause us to undergo one or more additional ownership changes. In that event, we generally would not be able to use our net operating losses from periods prior to this ownership change to offset future taxable income in excess of the annual limitations imposed by Sections 382 and 383 and those attributes that are already subject to limitations (as a result of our prior ownership changes) may be subject to more stringent limitations.
Natural disasters, terrorist or cyber attacks, or other catastrophic events could harm our operations.
Our worldwide operations could be subject to natural disasters and other business disruptions, which could harm our future revenue and financial condition and increase our costs and expenses. For example, our corporate headquarters in Petaluma, California is located near major earthquake fault lines. Further, a terrorist attack, including one aimed at energy or communications infrastructure suppliers or our cloud-based monitoring service, could hinder or delay the development and sale or performance of our products. In the event that an earthquake, tsunami, typhoon, terrorist or cyber attack, or other natural, manmade or technical catastrophe were to destroy any part of our facilities or those of our contract manufacturer, destroy or disrupt vital infrastructure systems or interrupt our operations or services for any extended period of time, our business, financial condition and results of operations would be materially and adversely affected.
Any unauthorized access to, or disclosure or theft of personal information we gather, store or use could harm our reputation and subject us to claims or litigation.
We receive, store and use certain personal information of our customers, and the end-users of our customers’ solar PV systems, including names, addresses, e-mail addresses, credit information and energy production statistics. We also store and use personal information of our employees. We take steps to protect the security, integrity and confidentiality of the personal information we collect, store and transmit, but there is no guarantee that inadvertent or unauthorized use or disclosure will not occur or that third parties will not gain unauthorized access to this information despite our efforts. Because techniques used to obtain unauthorized access or sabotage systems change frequently and generally are not identified until they are launched against a target, we and our suppliers or vendors may be unable to anticipate these techniques or to implement adequate preventative or mitigation measures.
Unauthorized use or disclosure of, or access to, any personal information maintained by us or on our behalf, whether through breach of our systems, breach of the systems of our suppliers or vendors by an unauthorized party, or through employee or contractor error, theft or misuse, or otherwise, could harm our business. If any such unauthorized use or disclosure of, or access to, such personal information were to occur, our operations could be seriously disrupted and we could be subject to demands, claims and litigation by private parties, and investigations, related actions, and penalties by regulatory authorities. In addition, we could incur significant costs in notifying affected persons and entities and otherwise complying with the multitude of foreign, federal, state and local laws and regulations relating to the unauthorized access to, or use or disclosure of, personal information. Finally, any perceived or actual unauthorized access to, or use or disclosure of, such information could harm our reputation, substantially impair our ability to attract and retain customers and have an adverse impact on our business, financial condition and results of operations.
We may be subject to disruptions or failures in information technology systems and network infrastructures that could have a material adverse effect on our business and financial condition.
We rely on the efficient and uninterrupted operation of complex information technology systems and network infrastructures to operate our business. A disruption, infiltration or failure of our information technology systems as a result of software or hardware malfunctions, system implementations or upgrades, computer viruses, cyber attacks, third-party security breaches, employee error, theft or misuse, malfeasance, power disruptions, natural disasters or accidents could cause breaches of data security, loss of intellectual property and critical data and the release and misappropriation of sensitive competitive information and partner, customer and employee personal data. We have been and may in the future be subject to fraud attempts from outside parties through our electronic systems (such as “phishing” e-mail communications to our finance, technical or other personnel), which could put

25

Table of Contents

us at risk for harm from fraud, theft or other loss if our internal controls do not operate as intended. Any of these events could harm our competitive position, result in a loss of customer confidence, cause us to incur significant costs to remedy any damages and ultimately materially adversely affect our business and financial condition.
We are dependent on ocean transportation to deliver our products in a cost efficient manner. If we are unable to use ocean transportation to deliver our products, our business and financial condition could be materially and adversely impacted.
We rely on commercial ocean transportation for the delivery of a large percentage of our products to our customers in North America, Europe, Australia and other markets. We also rely on more expensive air transportation when ocean transportation is not available or compatible with the delivery time requirements of our customers. Our ability to deliver our products via ocean transportation could be adversely impacted by shortages in available cargo capacity, changes by carriers and transportation companies in policies and practices, such as scheduling, pricing, payment terms and frequency of service or increases in the cost of fuel, taxes and labor; and other factors, such as labor strikes and work stoppages, not within our control. If we are unable to use ocean transportation and are required to substitute more expensive air transportation, our financial condition and results of operations could be materially and adversely impacted. Material interruptions in service or stoppages in transportation, whether caused by strike, work stoppage, lock-out, slowdown or otherwise, could materially and adversely impact our business, results of operations and financial condition.
The market price of our common stock may be volatile or may decline regardless of our operating performance.
The market price of our common stock has been and could be subject to wide fluctuations in response to, among other things, the risk factors described in this Annual Report on Form 10-K, and other factors beyond our control, such as fluctuations in the valuation of companies perceived by investors to be comparable to us. Furthermore, the stock markets have experienced price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many companies. These fluctuations often have been unrelated or disproportionate to the operating performance of those companies. These broad market and industry fluctuations, as well as general economic, political and market conditions, such as recessions, interest rate changes or international currency fluctuations, may negatively affect the market price of our common stock. In the past, many companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may become the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.
Our financial results may vary significantly from quarter to quarter due to a number of factors, which may lead to volatility in our stock price.
Our quarterly revenue and results of operations have varied in the past and may continue to vary significantly from quarter to quarter. This variability may lead to volatility in our stock price as research analysts and investors respond to these quarterly fluctuations. These fluctuations are due to numerous factors, including:
fluctuations in demand for our products;
the timing, volume and product mix of sales of our products, which may have different average selling prices or profit margins;
changes in our pricing and sales policies or the pricing and sales policies of our competitors;
our ability to design, manufacture and deliver products to our customers in a timely and cost-effective manner and that meet customer requirements;
our ability to manage our relationships with our contract manufacturers, customers and suppliers;
quality control or yield problems in our manufacturing operations;
the anticipation, announcement or introductions of new or enhanced products by our competitors and ourselves;
reductions in the retail price of electricity;
changes in laws, regulations and policies applicable to our business and products, particularly those relating to government incentives for solar energy applications;
unanticipated increases in costs or expenses;

26

Table of Contents

the amount and timing of operating costs and capital expenditures related to the maintenance and expansion of our business operations;
the impact of government-sponsored programs on our customers;
our exposure to the credit risks of our customers, particularly in light of the fact that some of our customers are relatively new entrants to the solar market without long operating or credit histories;
our ability to estimate future warranty obligations due to product failure rates, claim rates or replacement costs;
our ability to forecast our customer demand and manufacturing requirements, and manage our inventory;
fluctuations in our gross profit;
our ability to predict our revenue and plan our expenses appropriately; and
fluctuations in foreign currency exchange rates.
The foregoing factors are difficult to forecast, and these, as well as other factors, could materially and adversely affect our quarterly and annual results of operations. Any failure to adjust spending quickly enough to compensate for a revenue shortfall could magnify the adverse impact of this revenue shortfall on our results of operations. Moreover, our results of operations may not meet our announced guidance or the expectations of research analysts or investors, in which case the price of our common stock could decrease significantly. There can be no assurance that we will be able to successfully address these risks.
If research analysts do not publish research about our business or if they issue unfavorable commentary or downgrade our common stock, our stock price and trading volume could decline.
The trading market for our common stock depends in part on the research and reports that research analysts publish about us and our business. The price of our common stock could decline if one or more research analysts downgrade our stock or if those analysts issue other unfavorable commentary or cease publishing reports about us or our business. If one or more of the research analysts ceases coverage of our company or fails to publish reports on us regularly, demand for our common stock could decrease, which could cause our stock price or trading volume to decline.
Our affiliated stockholders, executive officers and directors own a significant percentage of our stock, and they may take actions that our other stockholders may not view as beneficial.
Our affiliated stockholders, executive officers and directors collectively own a significant percentage of our common stock. This significant concentration of share ownership may adversely affect the trading price for our common stock because investors often perceive disadvantages in owning stock in companies with controlling stockholders. Also, as a result, these stockholders, acting together, may be able to control our management and affairs and matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions, such as mergers, consolidations or the sale of substantially all of our assets. Consequently, this concentration of ownership may have the effect of delaying or preventing a change in control, including a merger, consolidation or other business combination involving us, or discouraging a potential acquirer from making a tender offer or otherwise attempting to obtain control, even if this change in control would benefit our other stockholders.
Sales of a substantial number of shares of our common stock in the public market by our existing stockholders could cause our stock price to fall.
Sales of a substantial number of shares of our common stock in the public market or the perception that these sales might occur, could depress the market price of our common stock and could impair our ability to raise capital through the sale of additional equity securities. We are unable to predict the effect that sales may have on the prevailing market price of our common stock. All outstanding shares of our common stock are eligible for sale in the public market, subject in some cases to the volume limitations and manner of sale requirements of Rule 144 under the Securities Act. Sales of stock by our stockholders could have a material adverse effect on the trading price of our common stock.
Certain holders of our securities are entitled to rights with respect to the registration of their shares under the Securities Act. Registration of these shares under the Securities Act would result in the shares becoming freely

27

Table of Contents

tradable without restriction under the Securities Act. Any sales of securities by these stockholders could have a material adverse effect on the trading price of our common stock.
We currently do not intend to pay dividends on our common stock and, consequently, your only opportunity to achieve a return on your investment is if the price of our common stock appreciates.
We currently do not plan to declare dividends on shares of our common stock in the foreseeable future. In addition, our term loan agreement restricts our ability to pay dividends. Consequently, an investor’s only opportunity to achieve a return on its investment in our company will be if the market price of our common stock appreciates and the investor sells its shares at a profit.
Our charter documents and Delaware law could prevent a takeover that stockholders consider favorable and could also reduce the market price of our stock.
Our certificate of incorporation and our bylaws contain provisions that could delay or prevent a change in control of our company. These provisions could also make it more difficult for stockholders to elect directors and take other corporate actions, including effecting changes in our management. These provisions include:
providing for a classified board of directors with staggered, three-year terms, which could delay the ability of stockholders to change the membership of a majority of our board of directors;
not providing for cumulative voting in the election of directors, which limits the ability of minority stockholders to elect director candidates;
authorizing our board of directors to issue, without stockholder approval, preferred stock rights senior to those of common stock, which could be used to significantly dilute the ownership of a hostile acquiror;
prohibiting stockholder action by written consent, which forces stockholder action to be taken at an annual or special meeting of our stockholders;
requiring the affirmative vote of holders of at least 66 2/3% of the voting power of all of the then outstanding shares of voting stock, voting as a single class, to amend provisions of our certificate of incorporation relating to the management of our business, our board of directors, stockholder action by written consent, advance notification of stockholder nominations and proposals, forum selection and the liability of our directors, or to amend our bylaws, which may inhibit the ability of stockholders or an acquiror to effect such amendments to facilitate changes in management or an unsolicited takeover attempt;
requiring special meetings of stockholders may only be called by our chairman of the board, if any, our chief executive officer, our president or a majority of our board of directors, which could delay the ability of our stockholders to force consideration of a proposal or to take action, including the removal of directors; and
requiring advance notification of stockholder nominations and proposals, which may discourage or deter a potential acquiror from conducting a solicitation of proxies to elect the acquiror’s own slate of directors or otherwise attempting to obtain control of us.
In addition, the provisions of Section 203 of the Delaware General Corporate Law may prohibit large stockholders, in particular those owning 15% or more of our outstanding common stock, from engaging in certain business combinations, without approval of substantially all of our stockholders, for a certain period of time.
These provisions in our certificate of incorporation, our bylaws and under Delaware law could discourage potential takeover attempts, reduce the price that investors might be willing to pay for shares of our common stock in the future and result in the market price being lower than it would be without these provisions.
Item 1B. Unresolved Staff Comments
None.
 
Item 2. Properties
Our corporate headquarters occupy approximately 100,000 square feet in Petaluma, California under a lease that expires in April 2022 and accommodates our principal engineering, sales, marketing, operations and

28

Table of Contents

finance and administrative activities. In addition to our corporate headquarters in Petaluma, as of December 31, 2016 , we leased office space in Boise, Idaho, Santa Clara, California, France, The Netherlands, Australia, New Zealand and China. At this time, we believe our facilities are adequate for our near term operational and business needs.
 
Item 3. Legal Proceedings
From time to time, we may be involved in litigation relating to claims arising out of our operations. We are not currently involved in any material legal proceedings. We may, however, be involved in material legal proceedings in the future. Such matters are subject to uncertainty and there can be no assurance that such legal proceedings will not have a material adverse effect on our business, results of operations, financial position or cash flows.
 
Item 4. Mine Safety Disclosures
Not applicable.

29

Table of Contents

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Our common stock has been traded on The NASDAQ Global Market under the symbol “ENPH” since March 30, 2012. The following table sets forth the range of intra-day high and low sales prices per share of our common stock as reported on the NASDAQ Global Market for the periods indicated.

 
Price Range
 
High
 
Low
2016
 
 
 
First Quarter
$
3.73

 
$
1.76

Second Quarter
2.80

 
1.73

Third Quarter
2.14

 
1.16

Fourth Quarter
1.50

 
0.95

 
 
 
 
2015
 
 
 
First Quarter
$
15.25

 
$
10.20

Second Quarter
14.17

 
7.54

Third Quarter
7.86

 
3.42

Fourth Quarter
5.37

 
1.63


Holders
As of March 6, 2017 , there were approximately 38 holders of record of our common stock.

Dividend Policy
We have never paid any cash dividends on our common stock. We currently anticipate that we will retain any available funds to finance the growth and operation of our business and we do not anticipate paying any cash dividends in the foreseeable future. Furthermore, our loan and credit facility agreements restrict us from paying cash dividends on our common stock.

Recent Sales of Unregistered Securities
Except as previously reported in our quarterly reports on Form 10-Q and current reports on Form 8-K filed with the SEC during the year ended December 31, 2016, there were no unregistered sales of equity securities by us during the year ended December 31, 2016.


30

Table of Contents

Stock Performance Graph
This section is not “soliciting material” and is not deemed “filed” for purposes of Section 18 of the Securities and Exchange Act of 1934 (the Exchange Act) or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933 or the Exchange Act, regardless of any general incorporation language in such filing.
The graph depicted below shows a comparison of cumulative total stockholder returns for our common stock, the Russell 2000 and the Guggenheim Solar Index for the period from March 29, 2012 (the date before our common stock began trading on the NASDAQ Global Market) to December 31, 2016 . An investment of $100 is assumed to have been made in our common stock and in each index on March 29, 2012 and its relative performance is tracked through December 31, 2016 . The information shown is historical and is not necessarily indicative of future performance.
ENPH-201312_CHARTX15250A05.JPG
 
3/29/12
 
12/31/12
 
12/31/13
 
12/31/14
 
12/31/15
 
12/31/16
Enphase Energy, Inc.
$
100

 
$
61

 
$
106

 
$
238

 
$
59

 
$
17

Russell 2000 Index
$
100

 
$
102

 
$
140

 
$
145

 
$
136

 
$
163

Guggenheim Solar Index
$
100

 
$
71

 
$
160

 
$
155

 
$
139

 
$
75





31

Table of Contents

Item 6. Selected Consolidated Financial Data
The information set forth below for the five years ended December 31, 2016 is not necessarily indicative of results of future operations, and should be read in conjunction with Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations , and the consolidated financial statements and related notes thereto included in Item 8, Consolidated Financial Statements and Supplementary Data , of this Annual Report on Form 10-K to fully understand the factors that may affect the comparability of the information presented below.

 
Years Ended December 31,
 
2016
 
2015
 
2014
 
2013
 
2012
 
(in thousands, except per share data)
Consolidated Statement of Operations Data:
 
 
 
 
 
 
 
 
 
Net revenues
$
322,591

 
$
357,249

 
$
343,904

 
$
232,846

 
$
216,678

Cost of revenues
264,583

 
249,032

 
230,861

 
165,430

 
161,390

Gross profit
58,008

 
108,217

 
113,043

 
67,416

 
55,288

Operating expenses:
 
 
 
 
 
 
 
 
 
Research and development
50,703

 
50,819

 
45,386

 
34,524

 
35,601

Sales and marketing
38,810

 
45,877

 
41,003

 
31,080

 
25,973

General and administrative
27,418

 
30,830

 
31,083

 
23,970

 
24,875

Restructuring and other charges
3,777

 

 

 

 

Total operating expenses
120,708

 
127,526

 
117,472

 
89,574

 
86,449

Loss from operations
(62,700
)
 
(19,309
)
 
(4,429
)
 
(22,158
)
 
(31,161
)
Other income (expense), net:
 
 
 
 
 
 
 
 
 
Interest expense
(2,773
)
 
(501
)
 
(1,863
)
 
(2,055
)
 
(6,436
)
Other income (expense)
(514
)
 
(893
)
 
(994
)
 
(837
)
 
30

Total other expense, net
(3,287
)
 
(1,394
)
 
(2,857
)
 
(2,892
)
 
(6,406
)
Loss before income taxes
(65,987
)
 
(20,703
)
 
(7,286
)
 
(25,050
)
 
(37,567
)
Provision for income taxes
(1,475
)
 
(1,379
)
 
(766
)
 
(863
)
 
(651
)
Net loss attributable to common stockholders
$
(67,462
)
 
$
(22,082
)
 
$
(8,052
)
 
$
(25,913
)
 
$
(38,218
)
Net loss per share attributable to common stockholders, basic and diluted
$
(1.34
)
 
$
(0.49
)
 
$
(0.19
)
 
$
(0.62
)
 
$
(1.24
)
Shares used in computing net loss per share attributable to common stockholders, basic and diluted
50,519

 
44,632

 
42,903

 
41,647

 
30,740

 
 
 
 
As of December 31, 
 
 
2016
 
2015
 
2014
 
2013
 
2012
 
 
(in thousands)
Consolidated Balance Sheet Data:
 
 
 
 
 
 
 
 
 
 
Cash and cash equivalents
 
$
17,764

 
$
28,452

 
$
42,032

 
$
38,190

 
$
45,294

Total assets
 
163,576

 
165,528

 
152,192

 
116,669

 
122,291

Warranty obligations
 
31,414

 
30,547

 
29,080

 
30,432

 
21,338

Debt
 
33,900

 
17,000

 

 
8,677

 
11,061

Total stockholders’ equity
 
1,300

 
41,449

 
46,952

 
40,206

 
56,655

 
 
 
 
 
 
 
 
 
 
 
Additional Data:
 
 
 
 
 
 
 
 
 
 
Working capital
 
$
35,092

 
$
48,920

 
$
56,190

 
$
57,144

 
$
61,143

Gross margin percentage
 
18.0
%
 
30.3
%
 
32.9
%
 
29.0
%
 
25.5
%

32

Table of Contents

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Forward-Looking Statements
The following discussion and analysis of our financial condition and results of operations should be read together with our consolidated financial statements and related notes appearing elsewhere in this Annual Report on Form 10-K. This discussion contains forward-looking statements reflecting our current expectations and involves risks and uncertainties. In some cases, you can identify forward-looking statements by terminology such as “may,” “will,” “should,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “intend,” “potential” or “continue” or the negative of these terms or other comparable terminology. For example, statements regarding our expectations as to future financial performance, expense levels and liquidity sources are forward-looking statements. Our actual results and the timing of events may differ materially from those discussed in our forward-looking statements as a result of various factors, including those discussed below and those discussed in the section entitled “Risk Factors” and elsewhere in this report.

Overview
We deliver simple, innovative and reliable energy management solutions that advance the worldwide potential of renewable energy. We were founded in March 2006 and are a market leader in the microinverter category of the U.S inverter market. Our technology was designed to increase energy production, simplify design and installation, improve system uptime and reliability, reduce fire risk, and provide a platform for intelligent energy management. Since inception, we have shipped more than 13 million microinverters, representing over 3 gigawatts of solar photovoltaic (PV) generating capacity, and more than 580,000 Enphase residential and commercial systems have been deployed in over 100 countries.
We sell our microinverter systems primarily to distributors who resell them to solar installers. We also sell directly to large installers and through original equipment manufacturers (“OEMs”) and strategic partners. Historically, revenues generated from the U.S. market have represented more than 80% of our total revenue.
Our first commercial shipment occurred in mid-2008. Our net revenues were $ 322.6 million , $357.2 million and $343.9 million for 2016 , 2015 and 2014 , respectively. We incurred net losses of $67.5 million , $22.1 million and $8.1 million for 2016 , 2015 and 2014 , respectively. As of December 31, 2016, we had $17.8 million in cash and cash equivalents and working capital of $ 35.1 million .
Although we have taken and are taking actions to improve our liquidity and help us achieve profitability, the solar market is volatile, and we are subject to market dynamics that are beyond our control. Based on our cash position at December 31, 2016 and our recent operating losses, we have concluded that substantial doubt exists as to our ability to continue as a going concern within the next year. If we require additional capital to finance our operations, this determination could impair our ability to finance our operations through the sale of equity, incurring debt, or other financing alternatives. If we fail to raise sufficient additional capital if needed, we may not be able to completely execute our business plan.
We have seen a decline in the average selling price (ASP) of our products that has been more rapid in the last eight quarters than what has been typical in the past. The decline in ASP is primarily the result of our decision to lower product pricing in advance of anticipated product cost savings to grow market share. As expected, the decrease in ASP has resulted in lower net revenues, gross profit and gross margins and has negatively impacted our liquidity.
We launched our next generation microinverter, the Enphase Home Energy Solution with IQ, in March 2017. This microinverter is a major milestone in our product cost reduction initiative, and we believe it will lower our product cost and simultaneously add new features and functionality. We also introduced our AC Battery storage system in Australia in the third quarter of 2016 and in the U.S. and Europe in the fourth quarter of 2016, and we believe the solar power storage market has significant growth potential.
We have taken a number of actions to reduce our operating expenses, including a reduction in our global workforce in the third quarter of 2016 and in January 2017. We also eliminated certain projects that did not have a near-term return on investment, and we have consolidated office space at our headquarters. We expect the cumulative impact of these actions to decrease our annualized ongoing operating expenses by approximately $40 million as compared to pre-restructuring annualized operating expenses, and we expect to realize the full benefit of these cost reduction actions in the second quarter of 2017.

33

Table of Contents

Although we have taken actions to reduce our operating expenses, we also continued to invest substantial resources to support our business, including enhancing our research and development operations to drive product cost reductions as well as developing technological innovations and new products, marketing and selling our products, and expanding into new product markets and geographies. At December 31, 2016 , we had 430 employees.

Components of Consolidated Statements of Operations
Net Revenues
We generate net revenues from sales of our microinverter systems and related accessories, which include microinverter units, AC Battery storage systems, an Envoy communications gateway, and our Enlighten cloud-based monitoring service.
Our revenue is affected by changes in the volume and average selling prices of our microinverter systems and related accessories, supply and demand, sales incentives, and competitive product offerings. Our revenue growth is dependent on our ability to compete effectively in the marketplace by remaining cost competitive, developing and introducing new products that meet the changing technology and performance requirements of our customers, the diversification and expansion of our revenue base, and our ability to market our products in a manner that increases awareness for microinverter technology and differentiates us in the marketplace.
Cost of Revenues and Gross Profit
Cost of revenues is comprised primarily of product costs, warranty, manufacturing personnel and logistics costs, freight costs, depreciation and amortization of test equipment and hosting services costs. Our product costs are impacted by technological innovations, such as advances in semiconductor integration and new product introductions, economies of scale resulting in lower component costs, and improvements in production processes and automation. Certain costs, primarily personnel and depreciation and amortization of test equipment, are not directly affected by sales volume.
We outsource our manufacturing to third-party contract manufacturers and generally negotiate product pricing with them on a quarterly basis. We believe our contract manufacturing partners have sufficient production capacity to meet the anticipated demand for our products for the foreseeable future. However, shortages in the supply of certain key raw materials could adversely affect our ability to meet customer demand for our products. We contract with third parties, including one of our contract manufacturers, to serve as our logistics providers by warehousing and delivering our products in the United States, Europe and Asia.
Gross profit may vary from quarter to quarter and is primarily affected by our average selling prices, product cost, product mix, warranty costs and sales volume fluctuations resulting from seasonality.
Operating Expenses
Operating expenses consist of research and development, sales and marketing, general and administrative and restructuring expenses. Personnel-related costs are the most significant component of each of these expense categories and include salaries, benefits, payroll taxes, recruiting costs, sales commissions, incentive compensation and stock-based compensation.
Research and development expense includes personnel-related expenses, third-party design and development costs, testing and evaluation costs, depreciation expense and other indirect costs. Research and development employees are primarily engaged in the design and development of power electronics, semiconductors, powerline communications, networking and software functionality, and storage. We devote substantial resources to research and development programs that focus on enhancements to, and cost efficiencies in, our existing products and timely development of new products that utilize technological innovation to drive down product costs, improve functionality, and enhance reliability. We intend to continue to invest appropriate resources in our research and development efforts because we believe they are critical to maintaining our competitive position.
Sales and marketing expense consists primarily of personnel-related expenses such as salaries, commissions, stock-based compensation, employee benefits and travel. It also includes trade shows, marketing, customer support and other indirect costs. We expect to continue to make the necessary investments to enable us to execute our strategy to increase our market penetration geographically and enter into new markets by expanding our customer base of distributors, large installers, OEMs and strategic partners. We currently offer

34

Table of Contents

microinverter systems targeting the residential and commercial markets in the United States, Canada, Mexico and certain Central American markets, the United Kingdom, France, the Benelux region, certain other European markets, Australia, New Zealand and certain other Asian markets. We expect to continue to expand the geographic reach of our product offerings and explore new sales channels in addressable markets in the future.
 
General and administrative expense consists primarily of salaries, incentive compensation, stock-based compensation and employee benefits for personnel related to our executive, finance, human resources, information technology and legal organizations. General and administrative expense also includes facilities costs and fees for professional services, which consist primarily of outside legal, accounting and information technology consulting costs.
Restructuring charges are the net of charges resulting from restructuring initiatives implemented in 2016 to improve operational performance and reduce overall operating expense and gain on divestiture of our services business. Costs included in restructuring primarily consist of severance for workforce reduction actions, non-cash charges related to the disposition of assets and impairment of property and equipment, and the establishment of lease loss reserves. See Note 9, “Restructuring and Other Charges” for additional information.
Other Expense, Net
Other expense, net primarily consists of interest expense and commitment fees under our revolving credit facility, term loans, and non-cash interest expense related to the amortization of deferred financing costs. Other expense, net also includes gains or losses upon conversion of foreign currency transactions into U.S. dollars.
Provision for Income Taxes
We are subject to income taxes in the countries where we sell our products. Historically, we have primarily been subject to taxation in the United States because we have sold the vast majority of our products to customers in the United States. As we have expanded the sale of products to customers outside the United States, we have become subject to taxation based on the foreign statutory rates in the countries where these sales took place. As sales in foreign jurisdictions increase in the future, our effective tax rate may fluctuate accordingly. Due to the history of losses we have generated in the United States since inception, we believe that it is more-likely-than-not that all of our U.S. and state deferred tax assets will not be realized as of December 31, 2016 .

Summary Consolidated Statements of Operations
 
The following table sets forth a summary of our consolidated statements of operations for the periods presented (in thousands):
 
 
Years Ended December 31,
 
2016
 
2015
 
2014
Net revenues
$
322,591

 
$
357,249

 
$
343,904

Cost of revenues
264,583

 
249,032

 
230,861

Gross profit
58,008

 
108,217

 
113,043

Operating expenses:
 
 
 
 
 
Research and development
50,703

 
50,819

 
45,386

Sales and marketing
38,810

 
45,877

 
41,003

General and administrative
27,418

 
30,830

 
31,083

Restructuring and other charges
3,777

 

 

Total operating expenses
120,708

 
127,526

 
117,472

Loss from operations
(62,700
)
 
(19,309
)
 
(4,429
)
Other expense, net
(3,287
)
 
(1,394
)
 
(2,857
)
Loss before income taxes
(65,987
)
 
(20,703
)
 
(7,286
)
Provision for income taxes
(1,475
)
 
(1,379
)
 
(766
)
Net loss
$
(67,462
)
 
$
(22,082
)
 
$
(8,052
)

35

Table of Contents


Comparison of 2016 , 2015 and 2014
 
Net Revenues
 
 
Years Ended December 31,
 
Change in
 
Years Ended December 31,
 
Change in
 
2016
 
2015
 
$
 
%
 
2015
 
2014
 
$
 
%
 
(In thousands, except percentages)
 
(In thousands, except percentages)
Net revenues
$
322,591

 
$
357,249

 
(34,658
)
 
(10)
 %
 
$
357,249

 
$
343,904

 
$
13,345

 
4
%
 

2016 Compared to 2015 . Net revenues decreased by 10% to $322.6 million in 2016 , as compared to 2015 . The number of microinverter units sold increased slightly in 2016 and was approximately 3.1 million units in both 2016 and 2015 . Net revenues decreased year-over-year primarily due to a decline in the average selling price per watt for microinverters shipped of approximately 24% in 2016 compared to 2015 . We expect the average selling price per watt of microinverters to continue to decline.
 
2015 Compared to 2014 . Net revenues increased by 4 % to $357.2 million in 2015 , as compared to 2014 . The number of microinverter units sold increased by 19% from 2.6 million units in 2014 to 3.1 million units in 2015 . Net revenues grew year-over-year at a slower pace than units sold due to a decline in the average selling price. Average selling prices per watt for microinverters shipped declined approximately 15% in 2015 compared to 2014 .
 
Cost of Revenues and Gross Margin
 
 
Years Ended December 31,
 
Change in
 
Years Ended December 31,
 
Change in
 
2016
 
2015
 
$
 
%
 
2015
 
2014
 
$
 
%
 
(In thousands, except percentages)
 
(In thousands, except percentages)
Cost of revenues
$
264,583

 
$
249,032

 
$
15,551

 
6
 %
 
$
249,032

 
$
230,861

 
$
18,171

 
8
 %
Gross profit
58,008

 
108,217

 
(50,209
)
 
(46
)%
 
108,217

 
113,043

 
(4,826
)
 
(4
)%
Gross margin
18.0
%
 
30.3
%
 
 
 
 
 
30.3
%
 
32.9
%
 
 
 
 
 

2016 Compared to 2015 . Cost of revenues increased by 6% in 2016 , as compared to 2015 , and was primarily attributable to a shift in product mix that resulted in increased sales of higher-priced accessories, including our AC Battery storage system. Gross margin decreased by 12.3 percentage points to 18.0% in 2016 , as compared to 30.3% in 2015 . While we experienced an overall reduction in our product costs, the adoption of a more aggressive pricing strategy resulted in a decrease to our gross margin. In 2016 , our gross margin also included the impact of higher warranty expense, as compared to 2015 . The higher warranty expense in 2016 was primarily due to incremental provisions recorded for changes in estimates, which reduced gross margin by 1.2 percentage points. See Note 7, “Warranty Obligations” to the consolidated financial statements for further discussion.
 
2015 Compared to 2014 . Cost of revenues increased by 8% in 2015 , as compared to 2014 , and was attributable to the greater volume of shipments of our products. Gross margin decreased by 2.6 percentage points to 30.3% in 2015 , as compared to 32.9% in 2014 . While we experienced a reduction in our product costs, the adoption of a more aggressive pricing strategy resulted in a decrease to our gross margin. In 2015 our gross margin included the benefit of lower warranty expense, as compared to 2014 . The higher warranty expense in 2014 was primarily due to incremental provisions recorded for changes in estimates, which reduced gross margin by 2.4 percentage points. See Note 7, “Warranty Obligations” to the consolidated financial statements for further discussion.


36

Table of Contents

 
Research and Development
 
 
Years Ended December 31,
 
Change in
 
Years Ended December 31,
 
Change in
 
2016
 
2015
 
$
 
%
 
2015
 
2014
 
$
 
%
 
(In thousands, except percentages)
 
(In thousands, except percentages)
Research and development
$
50,703

 
$
50,819

 
$
(116
)
 
0
 %
 
$
50,819

 
$
45,386

 
$
5,433

 
12
%
Percentage of net revenues
16
%
 
14
%
 
 
 
 
 
14
%
 
13
%
 
 
 
 
 

2016 Compared to 2015 . Research and development expenses decreased by $0.1 million in 2016 as compared to 2015 . The decrease is primarily due to decreased compensation costs and depreciation expense as a result of the restructuring actions taken in September 2016. The decrease was partially offset by higher outside professional fees utilized to support the development of new products as well as enhancements and cost reductions to existing products. Although the amount of research and development expenses may fluctuate from period to period due to the differing levels and stages of development activity, we expect it to decrease in the near-term as we realize the full benefits of our operating expense reduction initiatives.
 
2015 Compared to 2014 . Research and development expenses increased by $5.4 million in 2015 as compared to 2014 . This increase was primarily due to an increase in research and development headcount, which resulted in increased expense of $3.9 million from salaries and stock-based compensation partially offset by lower incentive compensation costs. In addition, there was an increase in outside contract services of $1.0 million to support the development of new products as well as enhancements and cost reductions to existing products. The remaining increase of $0.5 million was attributed to higher depreciation and amortization related to research and development equipment.
 
Sales and Marketing
 
 
Years Ended December 31,
 
Change in
 
Years Ended December 31,
 
Change in
 
2016
 
2015
 
$
 
%
 
2015
 
2014
 
$
 
%
 
(In thousands, except percentages)
 
(In thousands, except percentages)
Sales and marketing
$
38,810

 
$
45,877

 
$
(7,067
)
 
(15
)%
 
$
45,877

 
$
41,003

 
$
4,874

 
12
%
Percentage of net revenues
12
%
 
13
%
 
 
 
 
 
13
%
 
12
%
 
 
 
 
 

2016 Compared to 2015 . Sales and marketing expenses decreased by $7.1 million in 2016 as compared to 2015 . The decrease was primarily due to an $8.4 million decrease in compensation costs as a result of lower headcount and a $1.4 million decrease in travel and entertainment expenses as a result of cost savings initiatives. These decreases were partially offset by a $1.6 million increase in bad debt expense and a $1.8 million benefit related to a revaluation of acquisition-related contingent consideration liability that was recorded in 2015. We expect sales and marketing expenses to decrease in the near term as we realize the full benefits of the cost savings initiatives we have implemented.
 
2015 Compared to 2014 . Sales and marketing expenses increased by $4.9 million in 2015 as compared to 2014. This increase was primarily due to an increase in sales and marketing headcount during the first nine months of 2015, which resulted in increased expense of $4.0 million from salaries and stock-based compensation partially offset by lower incentive compensation costs. Other increases include a $1.3 million increase in bad debt expense, $0.7 million in marketing and consulting expenses and a $0.7 million increase in facilities related costs. These increases were partially offset by a $1.8 million benefit related to a revaluation of acquisition-related contingent consideration liability.

37

Table of Contents

 
General and Administrative
 
 
Years Ended December 31,
 
Change in
 
Years Ended December 31,
 
Change in
 
2016
 
2015
 
$
 
%
 
2015
 
2014
 
$
 
%
 
(In thousands, except percentages)
 
(In thousands, except percentages)
General and administrative
$
27,418

 
$
30,830

 
$
(3,412
)
 
(11
)%
 
$
30,830

 
$
31,083

 
$
(253
)
 
(1
)%
Percentage of net revenues
8
%
 
9
%
 
 
 
 
 
9
%
 
9
%
 
 
 
 

 
2016 Compared to 2015 . General and administrative expenses decreased by $3.4 million in 2016 as compared to 2015 . The decrease was primarily the result of a $1.7 million reduction in compensation costs due to lower headcount, a $0.2 million decrease in travel and entertainment expenses and a $1.8 million reduction in professional services, which was primarily attributable to lower legal and other professional fees. This decrease was partially offset by a $0.4 million increase in corporate expenses including rent, utilities and depreciation. We expect general and administrative expenses to decline in the near term as we realize the benefits of the cost savings initiatives we have implemented.
 
2015 Compared to 2014 . General and administrative expenses slightly decreased in 2015 as compared to 2016. Personnel-related costs decreased $2.5 million primarily due to lower incentive compensation expense in 2015, as compared to 2014. This decrease was offset by a $1.4 million increase related to corporate-level expenses, including rent, utilities and depreciation related to corporate fixed assets, a $0.5 million increase in recruiting costs and a $0.3 million increase in professional services costs.

Restructuring and Other Charges
 
 
Years Ended December 31,
 
Change in
 
Years Ended December 31,
 
Change in
 
2016
 
2015
 
$
 
%
 
2015
 
2014
 
$
 
%
 
(In thousands, except percentages)
 
(In thousands, except percentages)
Restructuring and other charges
$
3,777

 
$

 
$
3,777

 

 
$

 
$

 
$

 

Percentage of net revenues
1
%
 

 
 
 
 
 


 


 
 
 
 

 
2016 Compared to 2015 . In 2016 restructuring and other charges included $1.3 million of severance and other costs related to reduction in workforce, $2.6 million in asset impairments, $0.6 million lease loss reserves and contract termination costs and a gain of $0.6 million related to the disposition of our services business. We expect to incur additional restructuring charges in 2017 as we continue to take actions to reduce operating expenses.
 
Other Income (Expense), Net
 
 
Years Ended December 31,
 
Change in
 
Years Ended December 31,
 
Change in
 
2016
 
2015
 
$
 
%
 
2015
 
2014
 
$
 
%
 
(In thousands, except percentages)
 
(In thousands, except percentages)
Other income (expense), net
$
(3,287
)
 
$
(1,394
)
 
$
(1,893
)
 
(136
)%
 
$
(1,394
)
 
$
(2,857
)
 
$
1,463

 
51
%
 

2016 Compared to 2015 . Other expense increased by $1.9 million in 2016 , as compared to 2015 , primarily as a result of higher interest paid due to higher average outstanding borrowings on our revolving credit facility in 2016 and interest paid on an additional $25 million of term debt that funded in July 2016.

38

Table of Contents

 
2015 Compared to 2014 . Other expense decreased $2.9 million in 2015 as compared to 2014, primarily as a result of lower interest paid due to the full repayment of our term loan with Hercules Technology Growth Capital, Inc. in December 2014.


Liquidity and Capital Resources

As of December 31, 2016 , we had $17.8 million in cash and cash equivalents and working capital of $35.1 million . Cash and cash equivalents held in the United States was $9.6 million and consisted primarily of non-interest bearing checking deposits, with the remainder held in various foreign subsidiaries. We consider amounts held outside the U.S. to be accessible and have provided for the estimated U.S. income tax liability associated with the potential repatriation our foreign earnings.

Although we have taken actions to improve our liquidity and help us achieve profitability, the solar market is volatile, and we are subject to market dynamics that are beyond our control. Based on our cash position at December 31, 2016 and our recent operating losses, we have concluded that substantial doubt exists as to our ability to continue as a going concern within the next year. The accompanying consolidated financial statements for the fiscal year ended December 31, 2016 are presented on a going concern basis and do not include any adjustments that might result from the outcome of this uncertainty. Information about the actions we have taken and are taking to mitigate our liquidity constraints is presented below.
Actions we have taken to reduce our operating expenses include a reduction in our global workforce in third quarter of 2016 and a second reduction in January of 2017. We also eliminated certain projects that did not have a near-term return on investment, consolidated office space at our headquarters and divested our services business. We expect the cumulative impact of these actions to decrease our operating expenses by approximately 35%, and we expect to realize the full benefit beginning in the second quarter of 2017.
Sources of Liquidity
We have taken and are taking actions to improve our liquidity, including raising funds in the capital markets. In 2016, we completed a public offering of 13,000,000 shares of our common stock. Including the subsequent over-allotment, we sold approximately 15 million shares and realized net proceeds of approximately $16.2 million.
In December of 2016, we entered into an At The Market Issuance Sales Agreement (ATM) under which we may sell shares of our common stock up to a gross aggregate offering price of $17.0 million. We are not obligated to make any sales of the Shares under the Sales Agreement. As of December 31, 2016, we had not sold any shares under the ATM. We will have realized the full $17.0 million of gross proceeds available under the ATM at the time of this filing.
In January 2017, we completed a private placement of common stock that resulted in gross proceeds of $10.0 million.
In July 2016, we entered into a loan and security agreement (the “Term Loan Agreement” or “Original Term Loan Agreement”) with lenders that are affiliates of Tennenbaum Capital Partners, LLC (“TCP”), which has subsequently been amended and modified as discussed below and in Notes 10, “Debt” and 18, “Subsequent Event.” Under the agreement, the lenders committed to advance a term loan in an aggregate principal amount of up to $25.0 million with a maturity date of July 1, 2020. We drew down the $25.0 million term loan commitment at closing.
Payments under the original agreement are interest only through June 30, 2017, followed by consecutive equal monthly payments of principal plus accrued interest beginning on July 1, 2017 and continuing through the maturity date. The Original Term Loan Agreement provides for an interest rate per annum equal to the higher of (i) 10.25% or (ii) LIBOR plus 9.5625%, subject to a 1.0% reduction if we achieve minimum levels of Revenue and EBITDA (each as defined in the Term Loan Agreement) for the twelve-consecutive month period ending June 30, 2017 as set forth in the Term Loan Agreement. In addition, we paid a commitment fee of 3.3% of the loan amount upon closing and a closing fee of 10.0% of the loan amount is payable in four equal installments at each anniversary of the closing date. We may elect to prepay the loan by incurring a prepayment fee between 1% and 3% of the principal amount of the term loan depending on the timing and circumstances of prepayment.

39


The term loan is secured by a second-priority security interest on substantially all our assets except intellectual property. The Term Loan Agreement does not contain any financial covenants, but is subject to customary affirmative and negative covenants including restrictions on creation of liens, dispositions of assets, dividends, mergers, or changing the nature of its business, in each case, subject to certain customary exceptions. In addition, the Term Loan Agreement contains certain customary events of default including, but not limited to, failure to pay interest, principal and fees or other amounts when due, material breach of any representation or warranty, covenant defaults, cross defaults to other material indebtedness, events of bankruptcy and the occurrence of a material adverse change (as defined in the agreement) to our business. The Term Loan Agreement offers TCP typical rights and remedies in any event of default, including the ability to declare all amounts outstanding immediately due and payable. We do not expect the lender to declare default under any event, including the material adverse change clause.
In 2016 we had a $50.0 million revolving credit facility with Wells Fargo Bank, N.A. (“Wells Fargo”) that was entered into on November 7, 2012, as first amended on February 14, 2014. On December 18, 2015, we entered into an amended and restated revolving credit agreement with Wells Fargo (the “Revolver”) which extended the maturity date from November 7, 2016 to November 7, 2019 and added an uncommitted accordion feature that could increase the size of the facility by $25.0 million , subject to certain approvals and meeting certain criteria.

Availability under the Revolver was subject to a borrowing base calculation that limits availability to a percentage of eligible domestic accounts receivable plus a percentage of the value of eligible domestic inventory, less certain reserves. Borrowings under the Revolver bear interest in cash at an annual rate equal to, at our option, either LIBOR or a “base rate” that was comprised of, among other things, the prime rate, plus a margin that was between 1.0% and 3.75% depending on the currency borrowed and the specific term of repayment. The Revolver required us to pay a commitment fee between 0.25% and 0.375% based on the average daily unused portion of the revolving credit commitment.

The Revolver was secured by a pledge of substantially all our assets other than intellectual property and contains customary affirmative and negative covenants (including restricting our ability to make dividend payments) and events of default. In addition, the Revolver required us to maintain at least $15.0 million of liquidity at all times, of which at least $12.5 million had to be undrawn availability. As of December 31, 2016 , the Company was in compliance with such covenants under the Revolver.

As of December 31, 2016 , the amount outstanding under the Revolver was $10.1 million leaving an unused borrowing capacity of $12.9 million . The weighted-average interest rate related to these borrowings was  5.3% .

In February 2017, we amended our loan and security agreement with TCP to provide an additional $25 million in principal. We simultaneously terminated our revolving credit facility with Wells Fargo Bank, N.A., and the combined principal and interest balance of $10.3 million was fully repaid. The new loan has the same July 1, 2020 maturity date as the original TCP loan, both of which are now interest only until February 2018. See Notes 10, “Debt” and 18, “Subsequent Event” for further information.
The following table summarizes our cash flows for the periods presented (in thousands):
 
 
Year Ended December 31,
 
2016
 
2015
 
2014
Net cash provided by (used in) operating activities
$
(32,953
)
 
$
(21,160
)
 
$
24,222

Net cash used in investing activities
(11,795
)
 
(12,462
)
 
(16,534
)
Net cash (used in) provided by financing activities
34,375

 
20,564

 
(3,342
)
 

Cash Flows from Operating Activities
 
For 2016, net cash used in operating activities was $33.0 million, primarily resulting from a net loss of $67.5 million. The net loss was partially offset by non-cash charges including stock-based compensation of $10.3 million, depreciation and amortization of $10.6 million, asset impairment and restructuring charges of $3.2 million, and an increase in the provision for doubtful accounts of $3.1 million. In addition, the effect of changes in net operating assets and liabilities provided cash of $7.2 million.

40


The primary sources of cash from changes in net operating assets and liabilities were an $11.3 million increase in deferred revenue related to our Enlighten service and deferred product revenue, $8.8 million decrease in inventory, and a $8.9 million increase in accounts payable and accrued liabilities. Offsetting these sources of cash was an increase in accounts receivable of $18.0 million and an increase in other assets of $4.8 million. The increase in accounts receivable was due to higher sales in the fourth quarter of 2016 as compared to the same period in 2015, and the increase in other assets was primarily attributable to an increase in customer financing receivables.
For 2015, net cash used in operating activities was $21.2 million, primarily resulting from a net loss of $22.1 million. The net loss was partially offset by non-cash charges including stock-based compensation of $12.7 million, depreciation and amortization of $10.5 million, and net adjustments of $1.0 million for other non-cash items. In addition, the effect of changes in net operating assets and liabilities resulted in the use of cash totaling $23.3 million.
The primary use of cash from changes in net operating assets and liabilities was attributable to a $19.2 million increase in inventory. The increase in inventory was attributed to lower sales in the fourth quarter of 2015, as compared to the same period in 2014. Other uses of cash from changes in net operating assets and liabilities included a $5.3 million increase in other assets primarily attributable to an increase in customer financing receivables and the corresponding deferred costs of revenues, $3.4 million decrease in warranty obligations, $2.6 million decrease in accounts payable and accrued other liabilities due to timing of payments and a decrease in incentive compensation accrual and $2.5 million increase in accounts receivable. Offsetting these uses of cash was an increase in deferred revenue of $9.7 million related to our Enlighten service as well as deferred product revenue corresponding with the increase in customer financing receivables.
For 2014, net cash provided by operating activities was $24.2 million. Our net loss of $8.1 million was more than offset by non-cash charges and net changes in operating assets and liabilities. Non-cash charges included $9.7 million of stock-based compensation, $8.3 million of depreciation and amortization and $1.4 million of other non-cash charges. In addition, cash provided by net changes in operating assets and liabilities was $12.8 million.
Cash Flows from Investing Activities
 
For 2016, net cash used in investing activities of $11.8 million primarily resulted from purchases of test and assembly equipment, capitalized costs related to internal-use software and license fees for certain technology related to ASIC development, and was partially offset by $1.1 million in proceeds from the sale of our services business.

For 2015, net cash used in investing activities of $12.5 million included $10.2 million for purchases of test and assembly equipment and $2.3 million of capitalized internal-use software costs.

For 2014, net cash used in investing activities of $16.5 million included purchases of test and assembly equipment and capitalized internal-use software costs. In addition, we acquired substantially all of the assets of Next Phase Solar, Inc. (“NPS”) for an initial cash consideration of $2.5 million, which included $0.3 million being held back to cover indemnification obligations of the selling party and recorded as restricted cash. We subsequently sold NPS in 2016. We also purchased certain patents related to system interconnection and photovoltaic AC module construction for $0.8 million in 2014.
 
Cash Flows from Financing Activities
 
For 2016, net cash provided by financing activities of $34.4 million primarily consisted of $24.2 million net proceeds from our term loan and $17.8 million in proceeds from the issuance of common stock offset by $6.9 million net reduction in borrowings under our Revolver and $0.7 million in debt issuance and equity offering costs.

For 2015, net cash provided by financing activities primarily consisted of $17.0 million from net borrowings made under our Revolver to fund our working capital needs, $4.0 million received from common stock issuance pursuant to our equity incentive plans, $0.2 million in financing costs associated with the amended and restated revolving credit facility.

For 2014, net cash used in financing activities consisted of $8.7 million related to repayment of all outstanding principal under our term loan and equipment financing facility, offset by $5.4 million received from common stock issuance pursuant to our equity incentive plans.
  

41




Contractual Obligations
 
The following table summarizes our outstanding contractual obligations as of December 31, 2016 :
 
 
Payments Due by Period
 
Total
 
Less Than 1 Year
 
1-3 Years
 
4-5 Years
 
More Than 5 Years
 
(in thousands)
Operating leases
$
15,981

 
$
2,778

 
$
5,582

 
$
5,330

 
$
2,291

Revolving credit facility (1)
10,100

 
10,100

 

 

 

Term loan
25,000

 
3,032

 
16,489

 
5,479

 

Interest and fees related to term loan
8,141

 
3,136

 
4,191

 
814

 

Purchase obligations (2)
16,895

 
16,895

 

 

 

Total
$
76,117

 
$
35,941

 
$
26,262

 
$
11,623

 
$
2,291

(1)
Because borrowings outstanding under our revolving credit facility can fluctuate, interest payments have been excluded from the calculation of future contractual obligations related to the revolving credit facility.
(2)
Purchase obligations include amounts related to component inventory that our primary contract manufacturer procures on our behalf in accordance with our production forecast and a take-or-pay supply agreement for the purchase of silicone encapsulates that expires on December 31, 2018. The timing of purchases in future periods could differ materially from estimates presented above due to fluctuations in demand requirements related to varying sales levels as well as changes in economic conditions.
 
As of December 31, 2016 , the liability recorded for uncertain tax positions, including associated interest and penalties, was approximately $1.1 million. Since the ultimate amount and timing of cash settlements cannot be predicted due to the high degree of uncertainty, liabilities for uncertain tax positions are excluded from the contractual obligations table. See Note 10, “Debt” and Note 14, “Income Taxes” to the consolidated financial statements.
 
Off-Balance Sheet Arrangements
 
As of December 31, 2016, we did not have any off-balance-sheet arrangements as defined in Item 303(a)(4)(ii) of Regulation S-K.

Critical Accounting Policies
 
The preparation of our consolidated financial statements and related notes requires us to make judgments, estimates and assumptions that affect the reported amounts of assets, liabilities, revenue and expenses, and related disclosure of contingent assets and liabilities. We have based our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
 
For a description of our significant accounting policies, see Note 2, “Summary of Significant Accounting Policies” to our consolidated financial statements. An accounting policy is considered to be critical if it requires an accounting estimate to be made based on assumptions about matters that are highly uncertain at the time the estimate is made, and if different estimates that reasonably could have been used, or changes in the accounting estimates that are reasonably likely to occur periodically, could materially impact the consolidated financial statements. We believe the following critical accounting policies reflect the more significant estimates and assumptions used in the preparation of our consolidated financial statements.
 
Revenue Recognition
 
We generate revenue from sales of our microinverter systems, which include microinverter units and related accessories, an Envoy communications gateway, our cloud-based Enlighten monitoring service, and AC Battery

42


storage solutions to distributors, large installers, OEMs and strategic partners. Enlighten service revenue represented less than 2% of the total revenues for all periods presented.
 
Revenue from sales of our products is recognized when: (i) persuasive evidence of an arrangement exists; (ii) delivery of the products has occurred in accordance with the terms of the sales agreement and title and risk of loss have passed to the customer; (iii) the sale price is fixed or determinable; and (iv) collection is reasonably assured. Provisions for rebates, sales incentives, and discounts to customers are accounted for as reductions in revenue in the same period the related sales are recorded.
 
Sales of an Envoy communications gateway include the Enlighten cloud-based monitoring service. The allocation of revenue between the two deliverables is based on our best estimate of selling price determined by considering multiple factors including, internal costs, gross margin and historical pricing practices. After allocating the overall consideration from such sale to each deliverable using a best estimate of the selling price, (i) revenue from the sale of Envoy devices is recognized upon shipment, assuming all other revenue recognition criteria have been met and (ii) revenue from the cloud-based monitoring service is recognized ratably over the estimated economic life of the related Envoy devices of 10 years.
 
Inventory
 
Inventory is valued at the lower of cost or market. Market is current replacement cost (by purchase or by reproduction, dependent on the type of inventory). In cases where market exceeds net realizable value (i.e., estimated selling price less reasonably predictable costs of completion and disposal), inventories are stated at net realizable value. Market is not considered to be less than net realizable value reduced by an allowance for an approximately normal profit margin. We determine cost on a first-in first-out basis. Certain factors could affect the realizable value of its inventory, including customer demand and market conditions. Management assesses the valuation on a quarterly basis and writes down the value for any excess and obsolete inventory based upon expected demand, anticipated sales price, effect of new product introductions, product obsolescence, customer concentrations, product merchantability and other factors. Inventory write-downs are equal to the difference between the cost of inventories and market. The impact of changes in the inventory valuation allowance for 2016, 2015, and 2014 were insignificant. 
 
  
Warranty Obligations
 
Microinverters Sold Through December 31, 2013
Our warranty accrual provides for the replacement of microinverter units that fail during the product’s warranty term ( 15 years for first and second generation microinverters and up to 25 years for third and fourth generation microinverters). On a quarterly basis, we employ a consistent, systematic and rational methodology to assess the adequacy of its warranty liability. This assessment includes updating all key estimates and assumptions for each generation of product, based on historical results, trends and the most current data available as of the filing date. The key estimates and assumptions used in the warranty liability are thoroughly reviewed by management on a quarterly basis. The key estimates used by us to estimate its warranty liability are: (1) the number of units expected to fail over time (i.e. failure rate); (2) the number of failed units expected to result in warranty claims over time (i.e. claim rate); and (3) the per unit cost of replacement units, including outbound shipping and limited labor costs, expected to be incurred to replace failed units over time (i.e. replacement cost).
 
Estimated Failure Rates— Our Quality and Reliability department has primary responsibility to determine the estimated failure rates for each generation of microinverter. To establish initial failure rate estimates for each generation of microinverter, our quality engineers use a combination of industry standard MTBF (Mean Time Between Failure) estimates for individual components contained in that generation of microinverters, third party data collected on similar equipment deployed in outdoor environments similar to those in which our microinverters are installed, and rigorous long term reliability and accelerated life cycle testing which simulates the service life of the microinverter in a short period of time. As units are deployed into operating environments, we continue to monitor product performance via our Enlighten monitoring platform. It typically takes three to nine months between the date of sale and date of end-user installation. Consequently, our ability to monitor actual failures of units sold similarly lags by three to nine months. When a microinverter fails and is returned, we perform diagnostic root cause failure analysis to understand and isolate the underlying mechanism(s) causing the failure. We then use the results of this analysis (combined with the actual, cumulative performance data collected on those units

43


prior to failure via Enlighten) to draw conclusions with respect to how or if the identified failure mechanism(s) will impact the remaining units deployed in the installed base.
Estimated Claim Rates— Warranty claim rate estimates are based upon assumptions with respect to expected customer behavior over the warranty period. As the vast majority of our microinverters have been sold to end users for residential applications, we believe that warranty claim rates will be affected by changes over time in residential home ownership because we expect that subsequent homeowners are less likely to file claims than the homeowners who originally purchase the microinverters.
Estimated Replacement Costs— Three factors are considered in our analysis of estimated replacement cost: (1) the estimated cost of replacement microinverters; (2) the estimated cost to ship replacement microinverters to end users; and (3) the estimated labor reimbursement expected to be paid to third party installers performing replacement services for the end user. Because our warranty provides for the replacement of defective microinverters over long periods of time (between 15 and 25 years, depending on the generation of product purchased), the estimated per unit cost of current and future product generations is considered in the estimated replacement cost. Estimated costs to ship replacement units are based on observable, market-based shipping costs paid by us to third party freight carriers. We have a separate program that allows third-party installers to claim fixed-dollar reimbursements for labor costs they incur to replace failed microinverter units for a limited time from the date of original installation. Included in our estimated replacement cost is an analysis of the number of fixed-dollar labor reimbursements expected to be claimed by third party installers over the limited offering period.
If actual failure rates, claim rates, or replacement costs differ from our estimates in future periods, changes to these estimates may be required, resulting in increases or decreases in our warranty obligations. Such increases or decreases could be material.
 
Fair Value Option for Microinverters Sold Since January 1, 2014
 
Our warranty obligations related to microinverters sold since January 1, 2014 provide us the right, but not the requirement, to assign our warranty obligations to a third-party. Under Accounting Standards Codification (“ASC”) 825—Financial Instruments, (“fair value option”), an entity may choose to elect the fair value option for such warranties at the time it first recognizes the eligible item. We made an irrevocable election to account for all eligible warranty obligations associated with microinverters sold since January 1, 2014 at fair value. This election was made to reflect the underlying economics of the time value of money for an obligation that will be settled over an extended period of up to  25 years .
 
We estimate the fair value of warranty obligations by calculating the warranty obligations in the same manner as for sales prior to January 1, 2014 and applying an expected present value technique to that result. The expected present value technique, an income approach, converts future amounts into a single current discounted amount. In addition to the key estimates of failure rates, claim rates and replacement costs, we used certain inputs that are unobservable and significant to the overall fair value measurement. Such additional assumptions included compensation comprised of a profit element and risk premium required of a market participant to assume the obligation and a discount rate based on our credit-adjusted risk-free rate. See Note 8, (“Fair Value Measurements”) to the consolidated financial statements for additional information.
 
Recently Adopted Accounting Pronouncements
 
In November 2015, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2015-17, “Balance Sheet Classification of Deferred Taxes,” to simplify the presentation of deferred income taxes. The amendments in this update require that deferred tax liabilities and assets be classified as noncurrent in a classified statement of financial position. The amendments in this update apply to all entities that present a classified statement of financial position. The current requirement that deferred tax liabilities and assets of a tax-paying component of an entity be offset and presented as a single amount is not affected by the amendments in this update. We adopted ASU 2015-17 during the fourth quarter of 2015 and applied it retrospectively to all periods presented. The adoption of this guidance did not have a material impact on our consolidated balance sheets for all periods presented and had no impact on our results of operations.


44


In August 2014, the FASB issued ASU 2014-15, “Presentation of Financial Statements—Going Concern.” The update provides U.S. GAAP guidance on management’s responsibility in evaluating whether there is substantial doubt about a company’s ability to continue as a going concern and about related footnote disclosures. For each reporting period, management will be required to evaluate whether there are conditions or events that raise substantial doubt about a company’s ability to continue as a going concern within one year from the date the financial statements are issued. We adopted ASU 2014-15 during the fourth quarter of 2016. See Note 2, “Summary of Significant Accounting Policies.”
 
Recent Accounting Pronouncements Not Yet Effective
 
In May 2014, the FASB issued ASU 2014-09 (Topic 606), “Revenue from Contracts with Customers,” which will replace most existing revenue recognition guidance under U.S. GAAP. The updated standard’s core principle is that revenue is recognized when promised goods or services are transferred to customers in an amount that reflects the consideration to which an entity expects to be entitled in exchange for those goods or services. The standard generally requires an entity to identify performance obligations in its contracts, estimate the amount of variable consideration to be received in the transaction price, allocate the transaction price to each separate performance obligation, and recognize revenue as obligations are satisfied. In addition, the updated standard requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts. In 2015, the FASB issued guidance to defer the effective date to fiscal years beginning after December 15, 2017 with early adoption for fiscal years beginning December 15, 2016. The guidance permits the use of either a retrospective or cumulative effect transition method. We have not yet selected a transition method and are currently evaluating the impact of adoption on our consolidated financial statements.
 
In July 2015, the FASB issued ASU 2015-11, “Simplifying the Measurement of Inventory,” which requires most entities to measure most inventories at the lower of cost or net realizable value ("NRV"). This simplifies the evaluation from the current method of lower of cost or market, where market is based on one of three measures (i.e. replacement cost, net realizable value, or net realizable value less a normal profit margin). ASU 2015-11 does not apply to inventories measured under the last-in, first-out method or the retail inventory method, and defines NRV as the “estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation.” ASU 2015-11 is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years. Early adoption is permitted for any interim and annual financial statements that have not yet been issued. We are currently evaluating the impact of adoption on our consolidated financial statements.
 
In January 2016, the FASB issued ASU 2016-01, “Recognition and Measurement of Financial Assets and Financial Liabilities,” which amends certain aspects of recognition, measurement, presentation, and disclosure of financial instruments. Changes to the current guidance include the accounting for equity investments, the presentation and disclosure requirements for financial instruments, and the assessment of valuation allowance on deferred tax assets related to available-for-sale securities. In addition, ASU 2016-01 establishes an incremental recognition and disclosure requirement related to the presentation of fair value changes of financial liabilities for which the fair value option has been elected. Under this guidance, an entity would be required to separately present in other comprehensive income the portion of the total fair value change attributable to instrument-specific credit risk as opposed to reflecting the entire amount in earnings. ASU 2016-01 is effective for fiscal years and interim periods beginning after December 15, 2017, and upon adoption, an entity should apply the amendments by means of a cumulative-effect adjustment to the balance sheet at the beginning of the first reporting period in which the guidance is effective. Early adoption is not permitted except for the provision to record fair value changes for financial liabilities under the fair value option resulting from instrument-specific credit risk in other comprehensive income. We are currently evaluating the impact of adoption on our consolidated financial statements.  

In February 2016, the FASB issued Accounting Standards Codification (“ASC”) 842 (“ASC 842”), “Leases” which replaces the existing guidance in ASC 840, Leases.  ASC 842 is effective for fiscal years, and interim periods within those years, beginning after December 15, 2018. ASC 842 requires a dual approach for lessee accounting under which a lessee would account for leases as finance leases or operating leases. Both finance leases and operating leases will result in the lessee recognizing a right-of-use (ROU) asset and a corresponding lease liability. For finance leases the lessee would recognize interest expense and amortization of the ROU asset and for operating leases the lessee would recognize a straight-line total lease expense.  We are currently evaluating the impact of adoption on our consolidated financial statements.

45



In March 2016, the FASB issued ASU 2016-09, “Improvements to Employee Share-Based Payment Accounting,” which will simplify the income tax consequences, accounting for forfeitures and classification on the Statements of Consolidated Cash Flows. ASU 2016-09 is effective for fiscal years and interim periods beginning after December 15, 2016, with early adoption permitted. We are currently evaluating the impact of adoption on the consolidated financial statements.

In January 2017, the FASB issued ASU 2017-04, “Intangibles-Goodwill and Other (Topic 350): Simplifying the Test for Goodwill Impairment.” The provisions of this update simplify the subsequent measurement of goodwill by eliminating Step 2 from the quantitative analysis. For public entities, this guidance is effective for years beginning after December 15, 2019, including interim periods within those years. Early adoption is permitted after January 1, 2017. The adoption of this ASU is not expected to have an impact on our consolidated financial statements, and we are planning on early adoption beginning with the 2017 goodwill impairment testing.


46


Item 7A. Quantitative and Qualitative Disclosures about Market Risk
Foreign Currency Exchange Risk
 
We operate and conduct business in foreign countries where our foreign entities use the local currency as their respective functional currency and, as a result, are exposed to movements in foreign currency exchange rates. More specifically, we face foreign currency exposure from the effect of fluctuating exchange rates on payables and receivables relating to transactions that are denominated in Euros, British Pounds and Australian and New Zealand Dollars. These payables and receivables primarily arise from sales to customers and intercompany transactions. We also face currency exposure that arises from translating the results of our European, Australian and New Zealand operations, including sales and marketing and research and development expenses, to the U.S. dollar at exchange rates that have fluctuated from the beginning of a reporting period.
We have utilized foreign currency forward contracts to reduce the impact of foreign currency fluctuations related to anticipated cash receipts from expected future revenues denominated in Euros and intercompany transaction gains or losses. The contracts we enter into typically have maturities of less than one year. We do not enter into derivative financial instruments for trading or speculative purposes. The foreign currency forward contracts are accounted for as derivatives whereby the fair value of the contracts is reported as other current assets or current liabilities in the accompanying consolidated balance sheets, and gains and losses resulting from changes in the fair value are reported in other income (expense), net, in the accompanying consolidated statements of operations.
The following table presents the fair values of our outstanding foreign currency forward contracts at December 31, 2016 and 2015 (in thousands):
 
 
December 31,
 
 
2016
 
2015
Assets:
 
 
 
 
Foreign currency forward contracts
 
$

 
$
86

 
 
 
 
 
Liabilities:
 
 
 
 
Foreign currency forward contracts
 
$

 
$
9

As of December 31, 2016 and 2015 , the aggregate gross notional amounts of outstanding foreign currency forward contracts, all with maturities of less than one year, were $0.0 million and $2.4 million , respectively. We recorded $0.1 million and $0.3 million of net gains in 2016 and 2015 , respectively, and $0.3 million of net losses in 2014 related to foreign currency forward contracts.
The foreign currency exchange rate risk associated with our forward currency exchange contracts is limited as the exposure is substantially offset by exchange rate changes of the underlying hedged amounts.

47

Table of Contents

Item 8. Financial Statements and Supplementary Data
ENPHASE ENERGY, INC.
 
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AS OF
DECEMBER 31, 2016 AND 2015 , AND FOR THE YEARS ENDED
DECEMBER 31, 2016 , 2015 AND 2014
 
 
Page
Report of Independent Registered Public Accounting Firm
Consolidated Balance Sheets
Consolidated Statements of Operations
Consolidated Statements of Comprehensive Loss
Consolidated Statements of Stockholders’ Equity
Consolidated Statements of Cash Flows
Notes to Consolidated Financial Statements

48

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
To the Board of Directors and Stockholders of Enphase Energy, Inc.:
 
We have audited the accompanying consolidated balance sheets of Enphase Energy, Inc. and subsidiaries (the “Company”) as of December 31, 2016 and 2015, and the related consolidated statements of operations, comprehensive loss, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2016. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.
 
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit includes consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
 
In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of Enphase Energy, Inc. and subsidiaries as of December 31, 2016 and 2015, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2016, in conformity with accounting principles generally accepted in the United States of America.

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 2 to the consolidated financial statements, the Company's recurring losses from operations and net cash used in operating activities raise substantial doubt about its ability to continue as a going concern. Management's plans concerning these matters are also discussed in Note 2 to the consolidated financial statements. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

 
/s/ Deloitte & Touche LLP
 
San Francisco, California
March 16, 2017

49


ENPHASE ENERGY, INC.
 
Consolidated Balance Sheets
(In thousands, except par value)
 
December 31,
 
2016
 
2015
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
17,764

 
$
28,452

Accounts receivable, net of allowances of $2,921 and $1,808 at December 31, 2016 and 2015, respectively
61,019

 
46,099

Inventory
31,960

 
40,800

Prepaid expenses and other
7,121

 
6,417

Total current assets
117,864

 
121,768

Property and equipment, net
31,440

 
32,118

Goodwill
3,664

 
3,745

Intangibles, net
945

 
2,220

Other assets
9,663

 
5,677

Total assets
$
163,576

 
$
165,528

LIABILITIES AND STOCKHOLDERS’ EQUITY
 
 
 
Current liabilities:
 
 
 
Accounts payable
$
31,696

 
$
25,569

Accrued liabilities
22,937

 
19,292

Deferred revenues
6,411

 
3,915

Warranty obligations, current portion (includes $3,296 and $2,601 measured at fair value at December 31, 2016 and 2015, respectively)
8,596

 
7,072

Revolving credit facility
10,100

 
17,000

Current portion of term loan
3,032

 

Total current liabilities
82,772

 
72,848

Deferred revenues, non-current
33,893

 
25,115

Warranty obligations, non-current (includes $7,036 and $3,581 measured at fair value at December 31, 2016 and 2015, respectively)
22,818

 
23,475

Other non-current liabilities
2,025

 
2,641

Term loan, less current portion
20,768

 

Total liabilities
162,276

 
124,079

Commitments and contingencies

 

Stockholders’ equity:
 
 
 
Preferred stock, $0.00001 par value, 10,000 shares authorized; none issued and outstanding

 

Common stock, $0.00001 par value, 100,000 shares authorized; 62,269 and 45,821 shares issued and outstanding at December 31, 2016 and 2015, respectively
1

 

Additional paid-in capital
252,126

 
224,732

Accumulated deficit
(250,535
)
 
(183,073
)
Accumulated other comprehensive loss
(292
)
 
(210
)
Total stockholders’ equity
1,300

 
41,449

Total liabilities and stockholders’ equity
$
163,576

 
$
165,528

 
See Notes to Consolidated Financial Statements.

50

Table of Contents

ENPHASE ENERGY, INC.
 
Consolidated Statements of Operations
(In thousands, except per share data)
 
Years Ended December 31,
 
2016
 
2015
 
2014
Net revenues
$
322,591

 
$
357,249

 
$
343,904

Cost of revenues
264,583

 
249,032

 
230,861

Gross profit
58,008

 
108,217

 
113,043

Operating expenses:
 
 
 
 
 
Research and development
50,703

 
50,819

 
45,386

Sales and marketing
38,810

 
45,877

 
41,003

General and administrative
27,418

 
30,830

 
31,083

Restructuring and other charges
3,777

 

 

Total operating expenses
120,708

 
127,526

 
117,472

Loss from operations
(62,700
)
 
(19,309
)
 
(4,429
)
Other income (expense), net:
 
 
 
 
 
Interest expense
(2,773
)
 
(501
)
 
(1,863
)
Other expense
(514
)
 
(893
)
 
(994
)
Total other expense, net
(3,287
)
 
(1,394
)
 
(2,857
)
Loss before income taxes
(65,987
)
 
(20,703
)
 
(7,286
)
Provision for income taxes
(1,475
)
 
(1,379
)
 
(766
)
Net loss
$
(67,462
)
 
$
(22,082
)
 
$
(8,052
)
Net loss per share, basic and diluted
$
(1.34
)
 
$
(0.49
)
 
$
(0.19
)
Shares used in computing net loss per share, basic and diluted
50,519

 
44,632

 
42,903

See Notes to Consolidated Financial Statements.

51

Table of Contents

ENPHASE ENERGY, INC.
 
Consolidated Statements of Comprehensive Loss
(In thousands)
 
Years Ended December 31,
 
2016
 
2015
 
2014
Net loss
$
(67,462
)
 
$
(22,082
)
 
$
(8,052
)
Other comprehensive loss:
 
 
 
 
 
Foreign currency translation adjustments
(82
)
 
(131
)
 
(308
)
Other comprehensive loss:
(82
)
 
(131
)
 
(308
)
Comprehensive loss
$
(67,544
)
 
$
(22,213
)
 
$
(8,360
)
 
See Notes to Consolidated Financial Statements.

52

Table of Contents

ENPHASE ENERGY, INC.
Consolidated Statements of Stockholders’ Equity
(In thousands, except per share data)
 
 
Common Stock
 
Additional
Paid-In
Capital
 
 
Accumulated
Deficit
 
Accumulated Other
Comprehensive
Income (Loss)
 
Total Stockholders’ Equity
 
 
Shares
 
Amount
 
 
 
 
BALANCE—December 31, 2013
 
42,123

 
$

 
$
192,916

 
$
(152,939
)
 
$
229

 
$
40,206

Issuance of common stock under employee stock plans
 
1,577

 

 
5,366

 
 
 
 
 
5,366

Stock-based compensation
 
 
 
 
 
9,740

 
 
 
 
 
9,740

Issuance of common stock upon cashless exercise of warrants
 
56

 

 

 
 
 
 
 

Net loss
 
 
 
 
 
 
 
(8,052
)
 
 
 
(8,052
)
Foreign currency translation adjustment
 
 
 
 
 
 
 
 
 
(308
)
 
(308
)
BALANCE—December 31, 2014
 
43,756

 
$

 
$
208,022

 
$
(160,991
)
 
$
(79
)
 
$
46,952

Issuance of common stock under employee stock plans
 
2,065

 

 
4,014

 
 
 
 
 
4,014

Stock-based compensation
 
 
 
 
 
12,696

 
 
 
 
 
12,696

Net loss
 
 
 
 
 
 
 
(22,082
)
 
 
 
(22,082
)
Foreign currency translation adjustment
 
 
 
 
 
 
 
 
 
(131
)
 
(131
)
BALANCE—December 31, 2015
 
45,821

 
$

 
$
224,732

 
$
(183,073
)
 
$
(210
)
 
$
41,449

Issuance of common stock under employee stock plans
 
1,498

 
1

 
1,144

 
 
 
 
 
1,145

Issuance of common stock, net of offering costs
 
14,950